how many bhp has your cupra 180 got??

[james walker]

yeah uprate the calipers to nice shiny porsche 996s..... youll love it.

 

[vee_dub_modder]

Have you got the part numbers?? I found a nice kit with floating rotors but some nice shiny porsch 996 ones would be unber cool

hoping to be ablt to pick a pair up for under £400 off fleabay

 

[tris]

I got my LCR Brembo's for less then 400

 

[jamiebennett81]

K03S hybrid

contact Mark at http://www.crturbos.co.uk/

 

[SeatR]

hey guys, i recently bhought a 180bhp leon and want to sort out all the easyest mods before i get it remapped, to get the most power out of it. thinking something like 230bhp.

What mods to shop?

4bar fpr
3" maf house?
exhaust
fmic

i got a set of 225 BAM injectors, do these fit and can it be run along with a k03s?

 

[adam cupra 20vt]

You can use standard injectors for that power mate, just use the 4bar FPR

 

[jamiebennett81]

hey guys, i recently bhought a 180bhp leon and want to sort out all the easyest mods before i get it remapped, to get the most power out of it. thinking something like 230bhp.

What mods to shop?

4bar fpr
3" maf house?
exhaust
fmic

i got a set of 225 BAM injectors, do these fit and can it be run along with a k03s?

you dont need to change the MAF housing, FPR (dependant on mapper) or the injectors for just a stg2 k03s

injectors and MAF typically only needed to be changed when going k03 hybrid or bigger

Exhaust and FMIC is a must though

 

[Cowie]

Got 232 BHP from mine,thats just a blueflame turbo back exhaust,green cotton panel filter,smoothed airbox,forge DV and a P-Torque re-map

 

[SeatR]

Got 232 BHP from mine,thats just a blueflame turbo back exhaust,green cotton panel filter,smoothed airbox,forge DV and a P-Torque re-map

what is your boost set to?

how many psi peak, and holding?

 

[Cowie]

what is your boost set to?

how many psi peak, and holding?

Hi mate am not able to alter boost,and don't have gauges so couldn't tell you what psi i'm getting sorry

 

[cupra_matt86]

I read that the leon 180 can go to a max of 300BHP before replacing internals and rebuilding the bottom end, mine is bout 200BHP at the moment, just waitin for my FMIC, hoses and get a remap.... hopefully i will get around 240BHP along with my other mods.

 

[jamiebennett81]

I read that the leon 180 can go to a max of 300BHP before replacing internals and rebuilding the bottom end, mine is bout 200BHP at the moment, just waitin for my FMIC, hoses and get a remap.... hopefully i will get around 240BHP along with my other mods.

no, its 350, with a small prayer said at the same time too

 

[cupra_matt86]

cool, just hope the prayer works for you. i personally wouldnt risk it. but good luck

 

[jamiebennett81]

cool, just hope the prayer works for you. i personally wouldnt risk it. but good luck

hell no, neither would I

 

[cupra_matt86]

so... how do i put pics up on here then? i have mad 15 posts

 

[tris]

so... how do i put pics up on here then? i have mad 15 posts

A site like photobucket mate

 

[cupra_matt86]

 

[vee_dub_modder]

cool, just hope the prayer works for you. i personally wouldnt risk it. but good luck

i'll give it a go lol.... i'll see how next weeks work goes first... k03s hybrid and water meth to follow

 

[StevieP]

My 2002 Cupra 180 runs 222/254 with shielded cone filter, custom 3"decat/2.5" catback, stock side mount IC and custom Stage 2 remap. Still think theres a little room for improvement. Once the FMIC is fitted after new year ill get her back on the dyno and tweaked

 

[nd-photo.nl]

Im driving around with 261BHP/395Nm (or 291LB)

Mapped with BP Ultimate RON98

20130616_JD_STage2_BPUltimate_r324932 by ND-Photo.nl, on Flickr

Mapped with BP Ultimate RON98 + Bio ethanol

20130616_JD_STage2_E85_r32493 by ND-Photo.nl, on Flickr

Mods:
-3" Toyosports downpipe modded with Magnaflow 200CPI sportscat
-2.5" Cobra Resonated catback
-Custom FMIC
-Toyosports FMIC piping
-Forge 006 yellow spring + 1 shim (in BOV mode)
-Creations Motorsport coldside DV kit
-NGK BKR7E sparks
-Kendall 5W50 Fully synthetic oil
-N249/N112 mod
-SFS Big Bore TIP
-Blox Velocity Stack airfilter
-Ltec Secondairy fuel pump
-4 BAR FPR
-BAM Racing Phenolic intake spacer
-Mapped out the MAF

And then there's the uprated brakes, suspension, etc. Car is mapped by JD Engineering in Holland.