DTomas

Active Member
Jun 3, 2022
14
3
I saw a few days ago that my passanger window isn't working. Driver window works but passanger doesn't on driver's switch. I tried unplugging the door plug that leads into the chassis, when I unplug both from driver and passanger side and plug it back in the passanger switch works but driver switch for passanger window isnt working for 10-15 minutes and then dies again. I also realized when I take out the key after being in ON position "standby" mode only works for passsanger side and I can open it and close it but not driver side. I tried changing the BCM I have one laying around, I checked the wiring everything seems in order. I also had a fault code through VCDS 01332 Door Control Module; Passanger Side (J387) No Signal/Communication- Intermittent.


Any help is needed if you had any similar/heard of problems like this please link it to me.
 
I saw a few days ago that my passanger window isn't working. Driver window works but passanger doesn't on driver's switch. I tried unplugging the door plug that leads into the chassis, when I unplug both from driver and passanger side and plug it back in the passanger switch works but driver switch for passanger window isnt working for 10-15 minutes and then dies again. I also realized when I take out the key after being in ON position "standby" mode only works for passsanger side and I can open it and close it but not driver side. I tried changing the BCM I have one laying around, I checked the wiring everything seems in order. I also had a fault code through VCDS 01332 Door Control Module; Passanger Side (J387) No Signal/Communication- Intermittent.


Any help is needed if you had any similar/heard of problems like this please link it to me.
Hi did you find the solution , I have the same problem.
 
I saw a few days ago that my passanger window isn't working. Driver window works but passanger doesn't on driver's switch. I tried unplugging the door plug that leads into the chassis, when I unplug both from driver and passanger side and plug it back in the passanger switch works but driver switch for passanger window isnt working for 10-15 minutes and then dies again. I also realized when I take out the key after being in ON position "standby" mode only works for passsanger side and I can open it and close it but not driver side. I tried changing the BCM I have one laying around, I checked the wiring everything seems in order. I also had a fault code through VCDS 01332 Door Control Module; Passanger Side (J387) No Signal/Communication- Intermittent.


Any help is needed if you had any similar/heard of problems like this please link it to me.

that error could be because you disconnecting the door, the door control module is integrated in the electric window motor...

It controls more stuff than just the windows, it controls stuff as electric mirrors and probably other things...