-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
Installing Fan washers
- Thread starter dephead2004
- Start date
They've just turned up. Ordered on 12th, posted on 15th. Shall be fitting tomorrow
Did you get heated ones? Been trying to find heated ones on eBay that won't cost £50+ for a pair...
I'm sure I posted link earlier in this thread to a website where I purchased mine. I think they were about £30 delivered.
Sent from my piece of shite iPhone - according to Muz.
Try this...
http://www.eurospares.co.uk/search?partNumber=5M0955986
Sent from my piece of shite iPhone - according to Muz.
http://www.eurospares.co.uk/search?partNumber=5M0955986
Sent from my piece of shite iPhone - according to Muz.
Upgraded from a mk1 cupra to an FR 184 a few weeks back and noticed the washers were a bit cack, so think I'm going to be doing this mod at some point soon
Think one of mine is playing up. Washing the car and when opened bonnet noticed screen wash under the bonnet along the rubber seal. Mainly on the drivers side.
Gave them a squirt, open bonnet and after a short time drivers side open pours out the spraying hole, other side fine.
As if a one way valve isn't doing it job?
Gave them a squirt, open bonnet and after a short time drivers side open pours out the spraying hole, other side fine.
As if a one way valve isn't doing it job?
Brilliant I love this small and easy updates that at the same time improve your car and make it a bit different. This will be the first thing I update once my car arrives.
Just one question though, while reading through the thread I started wondering are the headlight washers standard or are they part of some of the packs?
_________________
Seat Leon FR 1.8 TSI DSG, MY16 Apollo Blue - Awaiting arrival
Nissan Pulsar 1.2DiG-T CVT
VW Passat B6 2.0TDI BMP DSG - Sold
Just one question though, while reading through the thread I started wondering are the headlight washers standard or are they part of some of the packs?
_________________
Seat Leon FR 1.8 TSI DSG, MY16 Apollo Blue - Awaiting arrival
Nissan Pulsar 1.2DiG-T CVT
VW Passat B6 2.0TDI BMP DSG - Sold
Last edited:
Tested for this again today. Swapped the new jets side to side and get the same issue. So it's the car with the problem???
I wouldn't mind installing the winter headlight washer jets wonder how hard it can be
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Thanks Kevster, will check with the dealer if it is not too late to update my order, as the heated seats are a nice addition - the price of the package here is 250£, which seems to be fine.
However the Winter Package description says - Heated front seats and heating system for the headlight washers and windshield jets. I will ask if they were not added as standard at some point in time, just out of curiosity.
I guess it depends, I am not sure if the holes for the washers are already cut out on all front bumpers, I believe I have seen Leons without them. This would stop me personally as I will not be up to the task of cutting them out, there are professional who will be able to do it but it all comes down to the price.
_________________
Seat Leon FR 1.8 TSI DSG, MY16 Apollo Blue - Awaiting arrival
Nissan Pulsar 1.2DiG-T CVT
VW Passat B6 2.0TDI BMP DSG - Sold
Last edited:
I bet you'd need a bumper, all the gear for the extending washer jets, and ideally the bigger washer bottle for starters... wiring is where it will get tricky!
I tried to remove my stock washers and they wont budge. I was pulling as hard as I could and they were not coming out. Compared to how easy everyone else is saying it is to do I'm wondering what I'm doing wrong. With the hood up, im pulling from the jet side while pushing the entire part towards the windscreen with my thumb. Does anyone wanna make a quick tutorial video just to show us how its done safely.
Similar threads
