Is Achieving 280 possible from my 180 AUQ cupra

[Jamiejarnold]

Hybrid ko3s;
overhauled turbo & replaced turbine housing,
ported & machined compressor cover to suit upgraded comp wheel

Ko3s hybrid (1.3 bar)
S3 injectors
s3 pressure reg
Walbro 255 fuel pump
3 inch maf housing
Larger TIP
Fmic
3 inch cobra turbo back exhaust with sports cat

What else would I need? I know the rods may need up rating, any suggestions would be apprectaited! Also can anyone recommend a mapping to suit these mods and any others I would need for 280hp? Thanks

 

[Dano]

Probably be with while getting a 3 bar map sensor too

 

[csd_19]

Yes.

Although it's achievable on the standard fuel pump with a 4 bar reg and LCR/S3 injectors. With an LCR MAF and Samco TIP, did this back in 2005 on a hybrid k03s/k04:

Car had FMIC plus 3" Milltek DP with 200 cpi sports cat, 2.5" catback.