Forbez

Huge Member!
Feb 11, 2004
5,877
1
S.Wales
Visit site
Logs for 002, is anything wrong?

(BTW i have bugger all knowledge of VAG Com, so please be gentle!)
Code:
Saturday30December200609:25:02

TIME 		
	RPMLoadInj. On TimeMass Flow
STAMP 		/min% 	ms  	g/s
0.00	3040	106.8	13.94	67.28
0.60	3120	139.8	18.86	89.31
1.20	3240	160.9	21.73	98.42
1.78	3360	147.4	20.09	95.17
2.38	3480	145.9	20.09	98.36
3.06	3600	137.6	18.86	92.00
3.67	3680	138.3	18.86	99.19
4.18	3800	139.8	19.27	102.53
4.78	3920	143.6	20.09	108.17
5.39	4040	146.6	20.50	112.83
5.99	4160	145.9	20.91	115.97
6.59	4280	145.1	20.91	118.89
7.09	4360	144.4	20.91	118.89
7.70	4440	145.9	21.32	122.67
8.29	4560	145.9	21.32	125.72
8.89	4640	145.9	21.73	127.75
9.49	4720	144.4	21.73	128.89
10.09	4800	142.9	21.32	130.03
10.83	4880	145.9	22.14	137.25
11.47	5000	145.1	22.14	138.44
11.98	5080	144.4	22.14	140.06
12.48	5120	142.9	22.14	140.25
12.99	5160	141.4	21.73	139.75
13.58	5240	141.4	22.14	141.81
14.18	5320	139.1	21.73	140.06
14.78	5360	138.3	22.14	142.42
15.40	5400	136.8	22.14	140.08
15.99	5480	136.1	22.14	144.89
16.58	5520	140.6	22.96	148.94
17.18	5600	139.1	22.96	149.19
17.68	5640	139.1	22.96	150.33
18.35	5680	137.6	22.55	148.39
18.96	5760	136.8	22.55	149.47
19.49	5800	136.1	22.55	149.19
20.08	5840	134.6	22.14	151.86
20.68	5880	133.8	22.14	150.53
21.28	5920	133.8	22.14	152.39
21.88	5960	132.3	21.73	151.58
22.48	6000	132.3	21.73	151.06
23.08	6040	131.6	21.73	150.25
23.68	6040	130.8	21.73	150.25
24.19	6080	130.1	21.32	151.58
24.80	6120	129.3	21.32	150.81
25.40	6120	100.0	16.40	107.92
 
log block 020 also to look for CF timing pull & block 115 for request vs actual boost, and or 118 for induction temps during pull.

all good info to log and see whats going on.
 
Cheers Bill, i've been looking for someone to tell me what to log for ages!

Bad news is, laptop looks liked its fooked"!!! Arghhhhh!
 
Still baffled by my stupidly low figures. Just took a look at a leon cupras log showing 180+gs @6k I struggle for mid 150's still.
Im sure I read somewhere it could be to do with a dodgy lambda probe. Should be able to check this if/when new cable is delivered