mk 4 vag com

[Hartosh1]

No worries bud its pretty confusing

 

[Davidsr]

whats the auto locks and selective unlocking damien?

Selective unlocking is where just the drivers door unlocks. You need to press the unlock button twice in quick succession to unlock all the doors/boot at once.

 

[Pabs]

Well I can confirm that the "comfort rear wiper" works ok on my car, all enabled too

I had a completely different number to Damiens, but adding the same number (8192) enabled the feature no problem.

 

[Slimy]

Auto locks is when you drive off and the doors lock after 10mph i think! Selective locking im not sure about mate might be 1 click unlocks everything on the car

Selective locking means that 1 click does drivers door, 2 clicks does all doors. Without it, 1 click does all doors.

 

[PH1L NI]

I want the beep when locking my car.. but knowing my luck it wont be possible!

Don't want to buy it and then it not work for the one thing I want it to...

 

[Keir]

I want the beep when locking my car.. but knowing my luck it wont be possible!

Don't want to buy it and then it not work for the one thing I want it to...

I'm in exactly the same boat dude.

Will this work, also where exactly does the cable plug in on the car?

 

[Davidsr]

I've set the locking and unlocking beep on mine, was easy enough to do. Though it's only been on a week and I'm getting a bit sick of it already!

 

[Keir]

would you post of video of it in action?

 

[-=Rob=-]

You can increase / decrease the steering weight, go into chassis / address 44. Default setting I think is 111, you can increase up to 121, 131, 141, 151 etc. % Being heaviest and 1 least havy. Have a feeeling you can only go up to 5...

 

[Keir]

^ Are things like that do-able in the shareware version?

 

[rocky2008]

the automatic locking works on mine i did it yesturday the locking churp will only work if you have an alarm im guessing as it wouldnt let me do it yesturday

 

[Davidsr]

would you post of video of it in action?

The beeping? Yeah I can try tomorrow.

 

[Keir]

Cool thanks

 

[NickyJam]

does it not, mine works fine??

most 06 onwards owners i've posted to also haven't got it working...i assume yours is pre 2006?

 

[Davidsr]

http://www.youtube.com/watch?v=OfsuRMcoWd0

This is video of the car locking. Sorry for the poor quality, video cam on my phone is pants.

The unlocking is the same but it is two beeps.

 

[Keir]

http://www.youtube.com/watch?v=OfsuRMcoWd0

This is video of the car locking. Sorry for the poor quality, video cam on my phone is pants.

The unlocking is the same but it is two beeps.

Aww man thats cool as, thanks

 

[kidinspace]

Comfort rear wiper settings before changing

Here is now to do it, turn the cars ignition on and wire up your cable and start the VAG-COM software... from the main VAG-COM screen go for "Select control module" and on the next screen select "09-Cent. Elect." it will then connect to your cars central electronics menu and you then want to select "Coding" at this point you have two editable fields... the one we are editing is the software coding one. The original code on mines was 00140 ... do add the comfort wipe function I added 8192 to that, so changed the code to 08332 and clicked "Do It!" At this point I clicked "Coding" again to make sure that it had changed. Basically take the key and cable out - start the engine and put your front wipers on and then select reverse gear - the wiper should come on.

Here's what I get if I follow your instructions...

Not sure what to put in??

.G.

 

[Davidsr]

I presume you add the 8192 to the figure in software coding. Figure would be 24588

 

[fuzzy232]

So is vag com like a diagnostic program ? new to all this vag stuff haha

 

[Breezapom]

most 06 onwards owners i've posted to also haven't got it working...i assume yours is pre 2006?

Nope mine is facelift 56 m0rk done mine for me but works fine and same for pabs?