Mocal Oil Cooler and Catch can full parts list please..

[DOLBY]

Hi,
As above really...been looking into getting an oil cooler for a while. Also it would be a very wise decision to buy a catch can and baffled sump at the same time. Will get the sump from AKS Tuning when funds allow. I had a search on here and alot of the eBay links have expired. So basically need everything involved for fitting both of these things please.

Will have the Mocal 13 row cooler but the sandwich plates are different prices/sizes etc and i am getting a bit confused.

Thanks in advance for any help

 

[DOLBY]

anyone?

 

[richybigman]

I got a catch can made by Forge for £85 including delivery and sprayed black

 

[DOLBY]

It's more to do with piping, jubilees and anything else required to install one buddy


Sent from my iPhone when I should be working....

 

[richybigman]

Are you removing the PCV system?

 

[DOLBY]

Want to do it all dude, including an oil cooler and baffled sump.


Sent from my iPhone when I should be working....

 

[richybigman]

You need:
19mm Hose
8mm Hose
19mm 90deg elbow joiner
19mm 3way t shape joiner
Non return valve for the servo vacuum hose on the left of the manifold.
And a bung depending on whether or not you vent your catch can to atmosphere.

From what i've read though loads of threads, this is how to run the pipe work:

 

[richybigman]

I'm doing mine in a couple of weeks, just waiting for my B5 TIP to turn up

 

[DOLBY]

Cheers man, where do you get the bung etc from eBay?

There are all different sizes of sandwich plate too?

May be easier to get the full kit from backdraft Motorsport. It's pricy but easier


Sent from my iPhone when I should be working....

 

[richybigman]

The list is just for doing the PCV removal and installing a catch can. I'm not sure about the oil cooler fittings.
I got all the bits i need from ebay, rough pricing is:
19mm Hose - £12 per metre
8mm Hose - £5
19mm 90deg elbow joiner - £2.50
19mm 3way t shape joiner (Not sure as i'm using the Forge 3 way hose)
Non return valve - £25


Just remember you might need more joiners depending on how you're running the outlet from the can.

 

[ReDBull]

I've been looking at this fitting kit on eBay for the cooler do I need anything else?
http://item.mobileweb.ebay.co.uk/viewitem?itemId=400314473187&index=9&nav=WATCHING&nid=26849557297

Here's a good guild from ASN re the catch can and PVC removal.
www.audi-sport.net/vb/a3-s3-forum-8l-chassis/118021-guide-how-fit-catch-can-simplify-pcv-system.html