Oh eff you Owen!! :p
Smaller Profile I meant!:)

Yeah the imperial blue is realllly nice!!

Smaller...........Profile....... :think:

Needs moar lows to fix the arch gap. Needs thinner tryes to get a stretch, but OP needs to maintain the rolling radius of the tyre otherwise he'll lose his speedo, and it'll be like gearing the car down, higher revs to go no where.

Needs 20mm spacers and at least -40mm ride height IMO. Remember Jord, Our wheels are 16", we can afford to lose profile and width a bit, on 15s, you can't. :blink:
 
Smaller...........Profile....... :think:

Needs moar lows to fix the arch gap. Needs thinner tryes to get a stretch, but OP needs to maintain the rolling radius of the tyre otherwise he'll lose his speedo, and it'll be like gearing the car down, higher revs to go no where.

Needs 20mm spacers and at least -40mm ride height IMO. Remember Jord, Our wheels are 16", we can afford to lose profile and width a bit, on 15s, you can't. :blink:

Fúck the speedo.. Go for a 185/45/15 tyre and get naughty stretch, and then slam her on coilies... Would be ibiza p0rn
 
Looks good mate! Got a red 1.4 myself with some nice Cupra alloys on! Good to see someone with a 1.4 too.. haha :)
 
cheers for the comments guyss means alott.. and yes im saving for all of the above trust me..

im going for 195/45/15 as im not up for insane stretch.. my wheels are 7j but looking at some 7.5j and 8j at the rear staggered would be sickkk!!!

yearp spacing is needed however the wheels i have are very good off sets and the rear wheels are no in the arch like a hiding gipsy.. :D
however with a small stretch it will..

it will be mega slammed soon trust me from the people of edition38 there is 3 1.4 mk3 beefa's on there they are all slammed and look insane..

got standard rear lights onway as i had the smoked ones and they are horrible!

got them for a bargain the whole lot including the iner lights on the boot £35 delivered all working and no scratch on them at all.. took me ages to find some as most were going for £35 each with out the boot ones so was looking at paying £120 for the set with delivered so when i saw them I snapped them up right away :D

VR6 beige seats are gonna look sooo nice in a imperial blue beefa im excited :D

PEACE!
 
Last edited:
Update!!

have not updated for a while and i have had a couple extra things installed

as for the vr6 seats i have not seen 3dr beige ones in good nick and have had to settle for cupra interior its a shame its not with blue inserts..

20120819_191451.jpg


20120819_191508.jpg


after fitting the rears (with my friend in the picture) DURRPPP..
20120819_170020.jpg


i have added cupra door cards back and front to.. and also all the panelling inside the car apart from the dash as all of the cupra paneling is black and looks wayy better.. (i got this with the seats at a good price)..
and if thats not enough i even got a new headunit block as the one included with the interior as mine had the terrible battery drain.. no more unplugging fuses! LML..
the seats have only minor bolster wear and are very comfy!

soon when i get my new front top mounts these bad boys will be installed
20120822_145931.jpg


also trial fitted my friend compomotives 16" 8j et25 or 35 i think.. (which i am getting off him soon)
20120812_140836.jpg

need a little tlc and when i got the coilovers on it will be sitting nicely :)



one last thing my clutch bearing is making a horrible noise only had the clutch kit for 10 months went back to where it was fitted and getting a whole new kit under warrenty WINWIN!!
 
Last edited:
Mate, them seats are class!! Love them.. Get a picture of the full interior for me please:) With all the black plastics :) Wouldnt mind doing it to mine..

Those wheels will actually look SICK when the car is slammed;) I reckon they'll suit the beefa to a tee:)
I do love imperiel blue ibizas!! Jealous!!
 
Mate, them seats are class!! Love them.. Get a picture of the full interior for me please:) With all the black plastics :) Wouldnt mind doing it to mine..

Those wheels will actually look SICK when the car is slammed;) I reckon they'll suit the beefa to a tee:)
I do love imperiel blue ibizas!! Jealous!!

cheers man ill get some pictures up when the weather is dryer.. the difference between the non cupra and curpa panels is they have leather door card inserts where material is on yours its leather and the plastic is black rather than grey.. which imo goes better with are dash as the centre area of Ares is black (where the centre console is.. whereas its grey in the cupra)...

just got to persuade my mate to either sell them to me or let me have them for a year untill he has finished his mk2 jetta which is hes project car :L they are stretched on 195/45/16 and its a nice stretch soo i sitt very low without rubbing :)

16" imo is the best size that fill the ibiza arch nicely and can still go pretty low.. have you notched your car to get it low or you got a good clearances drive shaft.

i love imperial blue ones too and ive oly just hi 60,000 miles so its got plenty of life left :)
 
Last edited:
looks good mate i like the gloss blue door handles is that paint or wrapped?

cheers man.. they were done by the previous owner im pretty show they have been sprayed.. but not 100% i was not to sure on them but now with the cupra door cards they suit nicely.. :)
 
cheers man ill get some pictures up when the weather is dryer.. the difference between the non cupra and curpa panels is they have leather door card inserts where material is on yours its leather and the plastic is black rather than grey.. which imo goes better with are dash as the centre area of Ares is black (where the centre console is.. whereas its grey in the cupra)...

just got to persuade my mate to either sell them to me or let me have them for a year untill he has finished his mk2 jetta which is hes project car :L they are stretched on 195/45/16 and its a nice stretch soo i sitt very low without rubbing :)

16" imo is the best size that fill the ibiza arch nicely and can still go pretty low.. have you notched your car to get it low or you got a good clearances drive shaft.

i love imperial blue ones too and ive oly just hi 60,000 miles so its got plenty of life left :)

Yeah 16" are perfect.. No driveshaft issues as far as Im aware.. It is frigging low too ;)
 
Last edited:
just got my car back from a apparent "warranty" on the clutch bearing but it seems like that the slight noise is not coming from the clutch bearing.. they think its the first shaft motion bearing in the gearbox..

Great this car have given me nothing but problems :( im loosing love for my beefa...
 
Last edited:
just got my car back from a apparent "warranty" on the clutch bearing but it seems like that the slight noise is not coming from the clutch bearing.. they think its the first shaft motion bearing in the gearbox..

Great this car have given me nothing but problems :( im loosing love for my beefa...

If its any consolation, (I found out from experience) most 1.4 VAG engines have the same gearbox. Make sure its shaft driven, and you could probably pick one up from a scrappies for £30 no problem. Fittings a bit of a PITA, but nothing too bad. Might be worth just finding a decent mileage gearbox and replacing the whole thing. IMO, of course. But when my gearbox went, I completely lost 4th gear :cry: lol.
 
coilovers have been fitted.. all i can say is they are a pain in the ass! as i took the old top mount off to get the thrust bearing out it exploded and all the bearing balls went everywhere so i have had to order new ones for the fronts!

heres a pic of the rears
IMG_20120904_175308.jpg