Caution keep hands etc away from the fans during this test as they are expected to run:
Reconnect both fan connectors, if still disconnected, and disconnect the triangular 3 pin connector from the radiator fan thermo switch.
Bridge contact 1 and contact 2 with a short piece of wire, the fans should run at low speed.
Switch on ignition, bridge contact 2 and contact 3 with a short piece of wire, the fans should run at high speed.
Switch off ignition, reconnect thermo switch connector.
To identify the connector pin numbers, hold the connector facing you with connector latching mechanism at 2 o'clock, pin1 is then at 12 o'clock, pin 2 at 4 o'clock and pin 3 at 8 o'clock.