Some good progress there mate
Where abouts in the town are you from mate?
Cheers mate, I live in that lovely area called Walker
-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
RDS' Leon Cupra R
- Thread starter RDS
- Start date
Cheers mate, I live in that lovely area called Walker
Nice one..
Will have to meet up to convoy down to the RR day in Leeds
Definatley mate. Hoping to have a few more things done to the car before then.
Where about you from then?
Had a busy day today. Decided it was time to fit my FMIC.
First off I need to find some wood to get my car into the yard as its very steep and even at standard ride height the bumper wont clear the ramp. Once in the car went up on the stands:
After having an argument with the front bumper it eventually came off:
Having had to cut the screws for the map sensor (they just span in the pipe) I fitted the adapter with a bit of silicone and fitted the sensor to the pipe:
On went the FMIC and Map pipe:
Once fitted I decide the Brembos could do with a clean.
Before:
After:
Not perfect but it'll do untill I get some paint for them.
The front bumpers still off as I'm going to get the honeycomb grilles on. My dining room currently looks like a garage:
The missus isnt best pleased
First off I need to find some wood to get my car into the yard as its very steep and even at standard ride height the bumper wont clear the ramp. Once in the car went up on the stands:
After having an argument with the front bumper it eventually came off
:
Having had to cut the screws for the map sensor (they just span in the pipe) I fitted the adapter with a bit of silicone and fitted the sensor to the pipe:
On went the FMIC and Map pipe:
Once fitted I decide the Brembos could do with a clean.
Before:
After:
Not perfect but it'll do untill I get some paint for them.
The front bumpers still off as I'm going to get the honeycomb grilles on. My dining room currently looks like a garage:
The missus isnt best pleased
When I was taking the car apart I notice how little airflow the SMIC get:
Not exactly the best setup (especially for a stage 2 LCR). I'm looking forward to getting the car out on the road and seeing how it performs with the new cooler.
Not exactly the best setup (especially for a stage 2 LCR). I'm looking forward to getting the car out on the road and seeing how it performs with the new cooler.
I also have recently had a knocking noise coming from the engine bay. On further investigation it seems to be coming from the jubilee clips on the catch can knockin off the strut brace. I've tied a piece of silicone hose to the brace for now and will need to address this in the future:
Cheers mate. Looking forward to getting it out! hopefully be ordering a Badger 5 3" TIP after pay day!
Similar threads
