Rear Camber

[ahmadabdeen]

how you can do a camber in the back ? any special kits or bolts ??

 

[thewiizard]

you need to fit shims behind the rear hub. It's not an easy job though and it's only really done if you're on a track with it.

 

[ahmadabdeen]

there is no camber bolts for the suspension ??? and if you install the camber shims could you notice the negative camber or it is not much

 

[m0rk]

You can measure the difference if you add shims... whether you can feel it or not is another question.

Why do you feel you need to?

 

[M1KEH]

there is no camber bolts for the suspension ??? and if you install the camber shims could you notice the negative camber or it is not much

You can go to about 1.5 degress with one set of camber shims Or you can double up and go to 3 degrees. 1.5 is noticable, 3 is extreme and will ruin tyres quickly.

 

[ahmadabdeen]

1.5 i think is enough for me . iam doing all this because of the wheels i have 16*9 and it is hitting too much with the fender :S

 

[M1KEH]

http://www.gti-vr6.net/library/suspension/inst_rear_shims/ heres a guide
and a place to buy them
http://www.vag-tuner.com/acatalog/Camber_and_Toe_Correction_.html