Rear end not sitting correctly!

[cupra_ad]

I've noticed today that my rear end of my cupra isn't sitting quite right. The passenger side is sitting about .5 - 1 inch lower than the drivers.

Anybody any idea what is likely to cause this or could it be a million and one things? Springs/struts look ok from what I can see.

 

[Prebs]

I´ve recently fitted bilstein pss9 coilovers. They are all adjusted to the same hight but the rear left side(drivers side but my car is rhd)is sitting 1-1.2cm lower than the others.

Prebs

 

[AlexGSi2000]

One of the suspension springs could have corroded and collapsed.

 

[tarzan]

I´ve recently fitted bilstein pss9 coilovers. They are all adjusted to the same hight but the rear left side(drivers side but my car is rhd)is sitting 1-1.2cm lower than the others.

Prebs

same problem i hade in the front

 

[Cupra Ken]

mine is exactly the same but on the drivers side , everybody at work keeps saying "is it meant to sit like that" so bought some apex springs gonna fit them next week after this mad weekend, i'll let you know what the springs look like that are already on there.

 

[Prebs]

same problem i hade in the front

Was this with your new coilover kit?

Did you adjust the one beeing lower to fit the rest of the shocks?

prebs

 

[tarzan]

Was this with your new coilover kit?

Did you adjust the one beeing lower to fit the rest of the shocks?

prebs

yep it was i adjusted it so they the same both sides now

 

[Prebs]

Hm. I might have to adjust some of the shocks induvidually then but I think I`ll wait until the coilover kit has settled for a while even thou I bought it as a used kit.

Prebs

 

[tarzan]

mine was stil like that after 2 months

 

[Prebs]

Well, I have to raise it now anyway as I have an MOT(EU) coming up next month witch I should have done BEFORE I fitted the pss9. Typical, I always start off at the wrong end!!!

Prebs