It seems this Cupra *really* doesn't like working with Intelligent Octopus go. It aways takes the first charge that Octopus send though, but if the schedule changes and Octopus turn the charge off, the car will just show "Error" when Octopus turn it back on again. This leaves the car at best only partially charged.
This isn't an issue with the wife's Peugeot, Octopus can turn the charge on and off multiple times in the evening/overnight without any issues at all. The Cupra will only ever take the first charge presented to it, after that, it needs to be physically unplugged and re-plugged to get it working again.
The Zappi wall box is on the latest firmware etc.
I really don't want to set it to behave as a regular "dumb" charger and schedule from within the car itself, or link the car to IOG instead of the Zappi as the wife's car won't benefit from the cheap rate when that's charging (other than the fixed overnight hours after 23.30). Any suggestions how to get this working reliably?
This isn't an issue with the wife's Peugeot, Octopus can turn the charge on and off multiple times in the evening/overnight without any issues at all. The Cupra will only ever take the first charge presented to it, after that, it needs to be physically unplugged and re-plugged to get it working again.
The Zappi wall box is on the latest firmware etc.
I really don't want to set it to behave as a regular "dumb" charger and schedule from within the car itself, or link the car to IOG instead of the Zappi as the wife's car won't benefit from the cheap rate when that's charging (other than the fixed overnight hours after 23.30). Any suggestions how to get this working reliably?
