Short to B+

[mrk]

on a vag com scan if a sensor shows up to be short to b+ does that mean theres a wiring problem or is it just a case of getting a new sensor

 

[ian_cupra]

i'd say new sensor needed, unless there is a few coming up then could be wiring somewhere

 

[mrk]

the map was short to b+ aswell

 

[DPJ]

I think it means there's a short circuit somewhere....

Moving this to Vag-Com for more answers.

 

[BeartheBruce]

A short to b+ indicates that the input circuit in the control module is seeing battery voltage on the input pin. It could be a bad sensor, it could be a wiring problem, or it could be a ground has come off. You will need to take a volt meter and check the circuit.