basstard said:
I'm planning it for this summer.
The cupra D fmic with all the mounts and then custom tubing
maxcars1 said:
hacksaw, and some patience would do the trick.
hacksaw and no patience will give you something like this:
didn't bother me as I ended up doing:
But this is why I suggested fitting the forge FMIC.
maxcars1 said:
I know somebody who has lots of experience with stuff like this so this isn't a problem.
The cupra D IC is much cheaper and bigger then the Forge one and is more OEM.
See the link for some pics : http://users.skynet.be/fa364512/index.htm
Hehe - I had to take a stanley knife to much of my offside front bumper too due to the inlet pipe for the FMIC. Found a stanley knife much more accurate and less brutal than a hacksaw which could only go in a straight line. Stanley had a degree of flexibility.
Found a stanley knife much more accurate and less brutal than a hacksaw which could only go in a straight line. Stanley had a degree of flexibility.
maxcars1 said:Ummm would like to buy these pipes if you get it to fit inside the standard bumper
If there needs to be some cutting then it's the way it shall be
It'll be cheaper then a Forge anyway (and bigger
)Similar threads
