smic

  1. SMIC - MAP sensor - can it be plugged?

    On the SMIC, the MAP sensor is at the top near the outlet pipe. Looking to relocate this into a forge map sensor pipe. Do VW/Seat do a blanking plug? IF so, is there a part no.? car is Toledo 1.9TD130
  2. Intake Temp & SMIC Question.

    Now after having a spirited drive thought the gears (off road), Then slowed, Then planted the throttle thought the gears a 2nd time the car didnt seem to pull aswell before. Now the car is a 130PD with a remap. Now could this be from the intake temps getting to high thus making the turbo...
  3. wisejason

    LC SMIC core size

    Can some one tell me the core size for a standard SMIC on an LC?
  4. SMIC pics...

    Anyone got any pics of the standard FR TDi intercooler? I need a pic of the clip on the top hose connection if anyone has one lying about?
  5. Fmic Or Smic?

    Looking at intercoolers-should i go fm or sm. i'm thinking that a front mount may become a little counter productive, it will surely be dterimental to radiator performance????:confused: Advice plaese!
  6. CupraUK

    Leon Cupra SMIC arch vent (poor persons job!)

    A cheap and cheerful way of venting your IC like an S3/TT (About £3) You'll need: Parts - B&Q 16 Louvre Aluminium Boiler Vent, Rivets, 4mm washers Tools - Stanley knife, drill, pencil, rivet gun Time - About 1 hour 1) Get yourself an large (they do a small and a large) 16 louvre...
  7. sargey

    Bumper mod question 4 SMIC

    Ok, was washing the car just now and i looked down at the small air intake for the SMIC on my LC and was wondering. If i decided to cut out the rest of the bumper so its just one big hole (do a nice job mind not a hack job) would this make any improvement to the efficiency of the SMIC? I dont...
  8. LC Standard SMIC & Heat Soak Problems

    I was doing a bit of research on the standard fitted SMIC on the LC this arvo, and was reading various things, about the stock set up suffering from heatsoak and loosing power on warm days. Which got me to thinking (dangerous i know :whistle:) and wondered if a small 12v electric fan fitted...
  9. JIMYU

    anyone running k03s with smic?

    I'm just wondering how much it suffers from heatsoak compared with k03? How much different does it feel in general to a k03...? Thanks, Jim
  10. Forge SMIC?

    Was having a discussion with my mate today about adding an FMIC to my 2001 Leon, as i will just be doing the usual mods, turbo back exhaust, remap etc, and he said the Forge SMIC would be good enough..... now having owned an ibiza cupra before with a Forge FMIC i really know how good having...
  11. willcooke

    Wisdom of mapping a 90k LC and SMIC question.

    Guys, I've finally got the money together for a re-map and I've already convinced myself it's a good idea, but before I go ahead can anyone conclusively state that an engine with this many miles on it really shouldn't be put under any more stress? I've read a few posts where people have...
  12. Dodson

    Air Feed To SMIC On LC

    Was on my way to work this morning (3 hour drive) and i was thinking 'how the hell am i gonna get the money for a FMIC' when i ha a thought... Is it possible to get a cold air feed onto the SMIC on the LC (facelift) and is it beneficial or another stuck in motorway traffic bored useless idea?
  13. Nath.

    smic pikey mod

    I was on briskoda today and saw a thread about the smic on the fabia vrs, It seems that the vrs has no vent in the wheel arch liner, my fr has this and I was wondering if just the tdi and 20vt ibiza's have this or is it all of them? It seems to aid the AC getting rid of hot air from the...
  14. Double SMIC on Cupra (like LCR)

    I can buy a 2nd SMIC from a LCR. I suppose it's the same SMIC as a Cupra. Somebody have some experience on installing a 2nd SMIC on a Cupra? What parts do I have to buy? Pleased to hear. Thanks.
  15. Molehill_Mike

    **Information Only** OEM SMIC vs Laguna FMIC Logs

    Hey Peeps, For those that are interested....logs of my Laguna FMIC and the standard SMIC **PLEASE DO NOT MAKE THIS A LAGUNA Vs THREAD...OR A LAGUNA'S LOOK PANTS THREAD.... I WOULD ASK THE MODS TO ENSURE THIS....** I have done this as an informative thread only.... Mods K03S...
  16. smic

    would it be possible for the smic intercooler on the ibiza cupra to get blocked up with oil any thoughts
  17. maxcars1

    SMIC on the 130 Remaped Cars

    For thoese guys who have mapped thier 130s, Are you seeing any problems with temps on these engines, which I'm assuming are now around 175-185bhp, with just the SMIC. Again I'm assuming you havent all got the FMIC.
  18. Russo

    K03s + Forge SMIC??

    Just wondering if the cooling and airflow properties of the Forge SMIC will be sufficient enough to run a K03s. The FMIC seems to be the popular way to go but is there anyone who is running the K03S +SMIC successfully on their car?
  19. maxcars1

    FMIC or Upgraded SMIC

    Just picked up on this - thought it was an interesting read. http://www.tyrolsport.com/sidemount.htm
  20. STOCKY

    Compare FMIC and SMIC 130PD ibiza

    Had a chance to log some 130Pd ibizas today at a local meet Heres the graph from the Intake temps Would like to add they are from 2 different cars so I dont know how accurate they are Think we can see that the Forge FMIC works very well
Chris Knott Insurance - Competitive quotes for forum members