Spacer Width

[crezz]

what is the offset of your wheels buddy?

 

[Bentley1989]

theres a question, erm i dunno

all i know is that there 17" Momo Corse wheels....

Chris

 

[crezz]

ok not to worry, how much is the spigot pushing the centre cap by? if its not alot 10mm spacers would do it fine, but if you want a wider stance and to fill the arches a tad more go for 15mm spacers.

 

[Bentley1989]

riteo, ill try and get some 10mm ones then

will i need longer bolts for them? since 10mm of the bolt wont screw in cos of the spacer?

Chris

 

[crezz]

yes mate, there is a place on ebay that sell them with the bolts but i do believe you can also get them from badger on here

 

[OllieL]

Yeah my Porsche teles didnt scrub when I gave them a test run, that was with 25mm spacer in the rears on et 52 I think. What adapters were you running Dave?

Ollie

 

[surreyfull]

i am thinking of getting a set from Venom...

http://www.venommotorsport.com/manufacturer_product.php?manufacturer=FK&category=wheel&product=Spacers&make=Seat&model=Ibiza

im gonna go for 15mm spacers... but how do i know what PCD, NLB and Thread to go for?!?!?!

iv got mk3 cupra alloys on my 1997 ibiza

thanks

 

[MomoMK2]

theres a question, erm i dunno

all i know is that there 17" Momo Corse wheels....

Chris

heh same wheels,

yup mate had same problem with them just paid the guy who fitted my suspension an extra tenner to put some 10mm spacers on to sort it, original bolts were fine (he said). would like 15 or 20mm now tho, and -60mm springs.

 

[Bentley1989]

Cheers Tom...

Ill have a look for some spacers then, after ive got the centre washer things sorted anyways lol

Chris

 

[surreyfull]

i am thinking of getting a set from Venom...

http://www.venommotorsport.com/manufacturer_product.php?manufacturer=FK&category=wheel&product=Spacers&make=Seat&model=Ibiza

im gonna go for 15mm spacers... but how do i know what PCD, NLB and Thread to go for?!?!?!

iv got mk3 cupra alloys on my 1997 ibiza

thanks

anyone?!

 

[sooty16v]

Scrubbing depends on the profile of the tyre aswell...

Im lowered about 70mm on 195/40's with 20mm spacers and have no problems...

 

[chris27]

anyone?!

4/100

 

[Mckellar]

Yeah my Porsche teles didnt scrub when I gave them a test run, that was with 25mm spacer in the rears on et 52 I think. What adapters were you running Dave?

Ollie

Steel FKAutomotive.

Best spacers to buy *aparently*

 

[rich.h44]

Sooty16v any pics mate?

 

[Boi Ninja]

where did u get them mate??? how much should i expect to pay for 15mm spacers and bolts??? all sites seem to have such a range of prices. what about offset?? and PCD?

thanks for help

eBay!!

 

[surcalation]

can someone help me with my alloys/might need spacers problem please?

post 10

Chris

You need spacers mate, my new wheels would of had the same problem, but I put 20mm spacers on and made sure my rear was wound back up as to not catch.

Running 20mm spacers and lowered 75mm Unsure how that wouldn't catch unless your rims still sit on the inside of your arch and not inline with it.

 

[crezz]

the offset could of been greater then standard so spacers wont push them right out, and also the 40 profile tires would make a difference

 

[rich.h44]

has any one got any pics of 10mm 15mm and 20mm spacers or befor and after? i want some but not sure what size to get!

 

[myseatcupra]

i got 20mm spacers on mine 205x40x17 rub a little when i go over big bumps but nothing a hammer cant sort if i could get off my arse lol