-
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps. Order now from the merchandise store
impossible as i have the 20mm spacers which bolt to the hub and then your wheel bolts to the spacer. ITs impossible for the bolts holding the spacer to the hub to come off as the wheel sits flush ontop of the bolts therefore impossible for the bolts to turn and come slack. I think there was a problem with the 15mm ones as im sure i read afew threads about them before i got them.
I'd still check yours are sitting flush to the hub, you dont want your bolts holding the spacers on to shear.
Hmm, well thats unlucky. Either i check my wheel nuts too often or i'm not driving hard enough. (plus that thread dosnt refer to MOMO spacers, but the same design i guess)
Last edited:
Yeah fair point, ill check them next weekend when i have the car in on the ramps at work when im doing my timing belt and water pump.
ive got these ones and they have been perfect!
when i first fitted them i took the wheels off every few days to check nothing was coming loose... all were fine
ive had them on for about 6 months now and had no problems at all
haha
its 42 or 43 mpg!
i have got that a few times now driving from Reading to Nottingham
it does mean driving like an absolute granny all the way up the M1 (like 60-70mph) but it does do it, and when i arrived i fiiled the tank back up and calculated the mpg from that and it was almost spot on!!
they can be economical, but mine is rarely over 32mpg through normal driving
its 42 or 43 mpg!
i have got that a few times now driving from Reading to Nottingham
it does mean driving like an absolute granny all the way up the M1 (like 60-70mph) but it does do it, and when i arrived i fiiled the tank back up and calculated the mpg from that and it was almost spot on!!
they can be economical, but mine is rarely over 32mpg through normal driving
I have these on my car and aint had a problem with them yet, been on for about a month now
Heres a wee guide I did when I fitted them
http://www.seatcupra.net/forums/showthread.php?t=136418&highlight=spacers
If i perchased these spacers?http://www.europerformance.co.uk/pages/products/product_info.mhtml?id=411089
which bolts would i need to get? as i ant got a clue, lol
http://www.europerformance.co.uk/pa...y.mhtml?category=wheels&manufacturer=grayston
which bolts would i need to get? as i ant got a clue, lol
http://www.europerformance.co.uk/pa...y.mhtml?category=wheels&manufacturer=grayston
A think ive sussed it out...should be these im after
http://www.europerformance.co.uk/pages/products/product_info.mhtml?id=345624
http://www.europerformance.co.uk/pages/products/product_info.mhtml?id=345624
Similar threads
