spacers

[itfben]

no they dont.

 

[Cupra R101]

Silly Q here guys
When you say 15mm spacers is that either side on the rear so 30mm axle width
Or 15mm axle width

 

[LEE69]

15mm per wheel.

 

[Cupra R101]

Ok so DPM a lot more than ebay lol
Was thinkin maybe 8mm either side so 16 total on just rear but guess wouldn't make much difference would it??

 

[LEE69]

Yeah 8mm difference
10mm or 15mm seems the normal, i went 20mm

 

[Seat Gooner]

you would wouldn't you

 

[LEE69]

Yeah really like the stance i bought the backs first of here to try, liked it so got some for the front.
Going on Saturday when i get by new CV joint fitted.

 

[wayne lcr]

and me to 20mm 0m the back and 10 on the front.

 

[Seat Gooner]

always got to be one different lol mentioning no names Aheem lee

i thought you spouse to have the same front and back

 

[Cupra R101]

So maybe try 8mm either side on back
If like em get 15s and put the 8s up front??

 

[wayne lcr]

put what you want on the track on the front is longer than the back.

 

[DannyC87]

put what you want on the track on the front is longer than the back.

It is wider at the front on purpose.. not by mistake. A narrower rear helps combat understeer.

 

[wayne lcr]

you can only go to the edge of the arch any way and i found 10 mm was rite on the front and 20 on the back was rite on my car but you run 15 all way round dan.

 

[Seat Gooner]

so danny am i right in saying put 15 on the front and 10 on the back ???

 

[Cupra R101]

So really its trial and error as to how car handles
I have 24mm whiteline arb on rear set to stiffest
Getting 23mm R32 arb put on front with S3 strut brace to sort body roll
Am new to all this stuff!!

 

[DannyC87]

Personally I have gone 15mm all round to build on the original design without upsetting the balance. There are a number of factors to consider though, camber, tracking, ARBs, suspension etc etc

 

[wayne lcr]

well i ant arguing with ya lol i like mine as it is and you do tracks and i dont.

 

[mr.chris]

Rmember to extend ure wheel Bolts. i had new tyres put on at the weekend and he noticed my wheels were holding on by 1mm of thread. count myself lucky.
spacers on my car were put on by previous owner and he hadnt botherd

 

[Seat Gooner]

good point danny as the the rear will always be different to the front as long as you use the same size

 

[DannyC87]

Rmember to extend ure wheel Bolts. i had new tyres put on at the weekend and he noticed my wheels were holding on by 1mm of thread. count myself lucky.
spacers on my car were put on by previous owner and he hadnt botherd

Previous owner = f'ing tool!!

good point danny as the the rear will always be different to the front as long as you use the same size

all depends what you want from the car, mine is all about go, not show!