t0m's LCR AmD Stage 2 - Turini's, Wavetrac LSD, Recaro's..

[t0m]

Soooooooooooo many nice cars!!

Oh yes, there was some serious VAG eye candy on Sunday

This is why i want my green cotten pannel filter gone now and Forge TIP replaced with badger5 version and a jetex cone filter im sure mine could do better bhp wise, torque on mine seems to be higher than some with better mods already

DK is your car lowered?

i would be up for another rolling road day at AMD if anyone wants to meet up on a nice dry cold day!

Badger TIP and Jetex would see higher figures I bet mate, but lower down you might notice very slight lag which I do with the filter. But it's barely noticeable past 2nd gear and decent revs! If you want the noise look no further, mine really whooshes and has a nice little 'tssschhhhh' with the DV noise being louder than ever. I love it personally but it's not to everyone's taste I imagine.

I'll answer your question on DK's car as I've been talking to him about what suspension to get and he's not lowered, just yet

I'd be up for meeting you down AmD on another day mate if we can get a few interested. Just for a few runs and I haven't met you yet either

 

[RS6]

Yeah hoping for better figures with the changes made. im running a new maf now as well figures were slightly down on it so replace it, old one they changed on the day was dirty, what spring is in your 007p yellow? be good to meet up tom friend of mine who came down with me last week has a lovely mint honda integra type r that has ran on a dyno once he said he would be interested in testing it on another set of rollers as well be good to get a few others down as well

 

[EL]

Awesome pics, car is sweeeeeeeeeeet!!

 

[t0m]

Yeah hoping for better figures with the changes made. im running a new maf now as well, old one they changed on the day was dirty, what spring is in your 007p yellow? be good to meet up tom friend of mine who came down with me last week has a lovely mint honda integra type r that has ran on a dyno once he said he would be interested in testing it on another set of rollers as well be good to get a few others down as well

Your figures are good though mate, not much room for improvement. But then there's always the hunger for more
I'm running the standard spring which is green I believe.. Yellow is the next one up. I'm actually going to order the valve spring tuning kit from Forge very soon as it's slipped my mind now for too long! I want to open the 007p and check it out. I think it's actually in need of a service..

Yeah that sounds good, ask him when he wants to bring it down and any others. I'd be happy to pop over if I'm about and go have a roll

 

[t0m]

Awesome pics, car is sweeeeeeeeeeet!!

Cheers boss!!!

 

[D.K]

DK is your car lowered?

Not yet

 

[RS6]

Your figures are good though mate, not much room for improvement. But then there's always the hunger for more
I'm running the standard spring which is green I believe.. Yellow is the next one up. I'm actually going to order the valve spring tuning kit from Forge very soon as it's slipped my mind now for too long! I want to open the 007p and check it out. I think it's actually in need of a service..

Yeah that sounds good, ask him when he wants to bring it down and any others. I'd be happy to pop over if I'm about and go have a roll

im hungry now! well Coops is a 210 LCR running good results, so im still keen to push it up some more lol interesting your still running a green spring as soon as the spring was changed on mine on the day from green to yellow the power went up again on the next run, green spring couldn't cope lol i have it here its very loose only bought it 7 months ago, well there will be two cars very interested in going to another rolling road day im sure we can find some others on here so we can fix a date for a meet very soon

 

[t0m]

Well Coops is a 210 LCR running good results, so im still keen to push it up some more lol interesting your still running a green spring as soon as the spring was changed on the day from green to yellow the power went up again on the next run, green spring couldn't cope lol, well there will be two cars very interested im sure in another rolling road day if we can find some others so we can fix a date for a meet soon enough im sure

Yeah Adam has done really well with his LCR. I really love his car. Very free flowing and running as much as it can now I think. It's very well kitted out.

Pretty sure I'm running green spring mate. The 007p went on last February and hasn't been touched since. I never bought it with a spring kit so I'm guessing the standard green one is in it. Never looked haha!! I'm going to order the kit and have it apart though soon hopefully. Maybe if I get the yellow spring in there I could pull another 10bhp, after all mine is a bit low on the power side

Sounds good mate. Have a word with your contacts and let me know what you come up with. I should be down for it. I imagine Daz will be over AmD that day anyway

 

[D.K]

I'll be doing another RR day at AmD towards the end of the sumer if you can wait till then

 

[RS6]

Yeah Adam has done really well with his LCR. I really love his car. Very free flowing and running as much as it can now I think. It's very well kitted out.

Pretty sure I'm running green spring mate. The 007p went on last February and hasn't been touched since. I never bought it with a spring kit so I'm guessing the standard green one is in it. Never looked haha!! I'm going to order the kit and have it apart though soon hopefully. Maybe if I get the yellow spring in there I could pull another 10bhp, after all mine is a bit low on the power side

Sounds good mate. Have a word with your contacts and let me know what you come up with. I should be down for it. I imagine Daz will be over AmD that day anyway

I need that 10bhp more than you, your not allowed any more you never know a yellow spring might handle the boost better get it changed AMD guys changed it in like 2mins plus it was free lol

 

[RS6]

I'll be doing another RR day at AmD towards the end of the sumer if you can wait till then

before than DK! you know you want to! get your stage 2 sorted whilst the price is down abit?

 

[D.K]

before than DK! you know you want to! get your stage 2 sorted whilst the price is down abit?

I dont have to worry about the prices too much
I normally 6 month between organising them so we get a good turn out

 

[t0m]

I'll be doing another RR day at AmD towards the end of the sumer if you can wait till then

I'll be at that one, but fancy going on them again soon, if my dv spring is indeed the green one that's been in there!

I need that 10bhp more than you, your not allowed any more you never know a yellow spring might handle the boost better get it changed AMD guys changed it in like 2mins plus it was free lol

Stay away from my figures
Only joking. You'll get there, add the 3" tip you'll be laughing!

I am going to order the spring kit right now I think lol.

before than DK! you know you want to! get your stage 2 sorted whilst the price is down abit?

na, leave it as a summer one where we have the free food and stuff

but we can still pop down there before for a mini meet if a few of us want to on the off.

 

[coops10]

Erm... Can you both stay away from my figures please... lol

FYI: Mine has the yellow spring, I bought the kit from Forge and replaced it when the de-baffled charge pipe went on.

I really want to run mine again now it has the Phenolic gasket too as I've read it should help up the torque figures due to lower inlet temps. Might have to join you guys for those runs

 

[t0m]

Erm... Can you both stay away from my figures please... lol

FYI: Mine has the yellow spring, I bought the kit from Forge and replaced it when the de-baffled charge pipe went on.

I really want to run mine again now it has the Phenolic gasket too as I've read it should help up the torque figures due to lower inlet temps. Might have to join you guys for those runs

Name a date mate and we'll get down there with RS6 as he seems keen to aswell before the summer meet...

Thanks for the info bud, I'll get onto Forge about a spring kit and then we can all have a bhp battle down amd, lol.

 

[brad1]

I'll be up into the 300's soon, gotta be done

 

[t0m]

I'll be up into the 300's soon, gotta be done

Haha, I was waiting for you to join in here mate

Fancy coming AmD again with us soon before the summer meet while the temps are still cold?

 

[brad1]

Haha, I was waiting for you to join in here mate

Fancy coming AmD again with us soon before the summer meet while the temps are still cold?

Yeah I'll be up for that mate, new jetex filter is on, new sparks and some fresh oil very soon

 

[t0m]

Yeah I'll be up for that mate, new jetex filter is on, new sparks and some fresh oil very soon

Every little helps

I want to see what mine can do with the right DV spring in this time

 

[JamJay]

If you all can wait until the beginning of April, you'll see mine change from Stage 1 to Stage 2 if we plan it on the same day