i have a splitter on my car thats based on the Triple r design, problem is i noticed that when looking at the front end of the car from a distance, the splitter appears to be pointing upward.
I know that the bottom end of the front bumper has a downward angle when running your hand from the outer edge towards the inner edge - hence the splitter now points at an upward angle.
Can any of you gents who have the Triple R splitter on an pre-face lift mk2 Cupra tell me if your splitter appears to also point upward or does it sit reletively horizontal.
best way to gauge it out is to sit on the ground on either side of the front wheels and notice the line the splitter follows from the edge of the bumper near the wheel toward the front of the car.
ps. Kev told me he isnt sure as he has never really bothered to look
crappy pic for reference
I know that the bottom end of the front bumper has a downward angle when running your hand from the outer edge towards the inner edge - hence the splitter now points at an upward angle.
Can any of you gents who have the Triple R splitter on an pre-face lift mk2 Cupra tell me if your splitter appears to also point upward or does it sit reletively horizontal.
best way to gauge it out is to sit on the ground on either side of the front wheels and notice the line the splitter follows from the edge of the bumper near the wheel toward the front of the car.
ps. Kev told me he isnt sure as he has never really bothered to look
crappy pic for reference