Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Guest, 🎅🎄Looking for a stocking filler idea? Why not treat yourself or a loved one to our high quality CUPRA or SEAT valve caps.
Order now from the merchandise store
from wat i know (not much) they bypass ur ignition in a way so that when u remove the key ur engines for a preset time , i saw one being fitted to a fucus RS , the timer (HKS) had only positive , negative , handbrake earth and an ignition connection , dunno how this would work with the vag immobiliser centrsal locking tho
andy do u have the oil temp guage , wat i do is to let my engine sit for about 30 secs b4 shutdown as long as the temp is below 90 , (running temp) if it is above this i wait tilll it is below this , the last 5 minutes of every journey is took at low beans, helps drop temps
yes fella , forget the price of the add on , tho 190 fitted is familiar , on my old system , u couldnt use it as a turbo timer as such , basically u hit the * button and then locked and the car just kept runnin , tho alarmed , all i did was a few mins later in the house hit the * button again that killed the engine, so isnt automatic as such , u used intellistart b4
andy dont bother, i dunno about your place across the lough but the last 5 mins of my journey home is 30 zones, thats plenty of time for the turbo/manifold to cool down, why mess with electronics needlessly.
The purpose is to give the engine a prescribed period of idling so that the turbocharger can be cooled by the engine oil (and coolant, in many cases) that circulates through it. (It has NOTHING to do with waiting for the turbocharger to "spin down". That takes a quarter of a second.)
Diesel engines have lower exhaust temperature than gasoline engines. At anything less than full load, the temperature is FAR lower. It is low enough that the turbochargers in these vehicles do not have a connection to the engine coolant system - only to the lubricating oil. Under most conditions, there is no need to wait for the turbocharger to cool down, and hence, no need for a turbo timer.
The only potential exception is if you are towing a trailer or operating the vehicle at close to top speed (i.e. 160+ km/h) on the highway or climbing the side of a mountain pedal to the metal. But in most cases, you don't just come straight off such full load conditions and stop. You trickle through neighborhood streets, or you wander through a parking lot in search of a spot. Usually this is more than enough time even if you're driving the car hard. And if it DOES take less than a minute measured from the time you first take load off the engine (still coasting out on the road) until you get to a parking spot ... just let it finish that minute at idle.
I asked JBS about fitting a turbo timer when i was up there on monday and they said there's no point in fitting one to a diesel, more benifitial to petrols.
Needless to say, i think ill pass-maybe look into the Clifford dongle!!
@Brendy...My folks house in Jordanstown is just off the main road so most journeys the car goes virtually from 50ish to zero/off very quickly. However, i spend most time in Bang-er, so its more-or-less the same situation as yourself!!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.