Unable to reset/retrain window

[bartekp19962]

Hi All

I have seen multiple threads on procedure how to reset/retrain windows however it does not work for me - any thoughts?

 

[cairus]

All Windows?

 

[Leonfrdiesel184]

Hi mate mine did this and when I connected my obd connector and did a scan there was a fault code to do with the windows. I cleared this code and was able to set the windows up again. Code never came back at all think it was due to the cold weather at the time. I use carista and the free car scanner app to do this. It's brilliant mate highly recommended

 

[bartekp19962]

All Windows?

Driver rear side only affected by this issue

 

[bartekp19962]

Hi mate mine did this and when I connected my obd connector and did a scan there was a fault code to do with the windows. I cleared this code and was able to set the windows up again. Code never came back at all think it was due to the cold weather at the time. I use carista and the free car scanner app to do this. It's brilliant mate highly recommended

Right okay - will have to Invest in OBD

 

[Leonfrdiesel184]

Right okay - will have to Invest in OBD

Definitely mate they are so cheap I think about thirty quid but I use the free app car scanner. I can scan codes clear them play around with settings reset service intervals etc etc highly recommended

 

[cairus]

The error log with the error "basic setting missing" is completely irrelevant for programming the window. I recently had 10 errors in the door control unit and was able to program it.


How do you learn the window?

 

[Leonfrdiesel184]

The error log with the error "basic setting missing" is completely irrelevant for programming the window. I recently had 10 errors in the door control unit and was able to program it.


How do you learn the window?

Hi mate was only saying it worked for me. I have reprogrammed the window many times but on this occasion it wouldn't do it until I cleared the fault and I was instantly able to re learn the window mate

 

[bartekp19962]

The error log with the error "basic setting missing" is completely irrelevant for programming the window. I recently had 10 errors in the door control unit and was able to program it.


How do you learn the window?

I have used various suggestions from various threads and also referred to user manual

 

[cairus]

Have you tried diverting the battery again?

 

[Chris Bartram]

I had this, and I found clearing all fault codes and running the windows up and down using VCDS rather than the switches cleared it.

 

[cairus]

Which Error's was in the Log?

 

[Chris Bartram]

Which Error's was in the Log?

Not sure now. Definitely complaints about low battery and quite possibly adaption, but it was a good while ago.

 

[bartekp19962]

Have you tried diverting the battery again?

I did this with no joy

 

[bartekp19962]

I had this, and I found clearing all fault codes and running the windows up and down using VCDS rather than the switches cleared it.

I got OBD on order, will see what it shows up