Vag-Com Faults ???

[Jack Jumpin]

Hi,

Just done a scan on my 07 FR TDI and got a few faults, are they anything serious or something i should mention to the stealer ?

Or should i just clear them ?


Address 09: Cent. Elect. Labels: 3C0-937-049.LBL
Part No SW: 3C0 937 049 AE HW: 3C0 937 049 AE
Component: Bordnetz-SG H52 2002
Coding: 81880F2F00041000431D00000000000000007F075C4000
Shop #: WSC 04941

Part No: 1P0 955 119 B
Component: Wischer 110407 022 0601
Coding: 00056208
Shop #: WSC 04941

2 Faults Found:
01333 - Door Control Module; Rear Left (J388)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 131
Reset counter: 155
Mileage: 14677 km
Time Indication: 0
Date: 2005.09.13
Time: 31:63:63

Freeze Frame:
OFF
Voltage: 12.60 V
OFF
ON
OFF
OFF
OFF

01334 - Door Control Module; Rear Right (J398)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 155
Mileage: 15714 km
Time Indication: 0
Date: 2005.09.13
Time: 31:63:63

Freeze Frame:
OFF
Voltage: 12.80 V
OFF
ON
OFF
OFF
OFF

and


Address 19: CAN Gateway Labels: 1K0-907-530.LBL
Part No SW: 1K0 907 530 K HW: 1K0 907 951
Component: J533__Gateway H12 0170
Coding: 3D3F034007000203
Shop #: WSC 04941

2 Faults Found:
01334 - Door Control Module; Rear Right (J398)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 1
Reset counter: 155
Mileage: 15714 km
Time Indication: 0
Date: 2000.00.00
Time: 20:51:09

01333 - Door Control Module; Rear Left (J388)
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 2
Fault Frequency: 4
Reset counter: 155
Mileage: 14677 km
Time Indication: 0
Date: 2000.00.00
Time: 08:48:41

and

Address 46: Central Conv. Labels: 1K0-959-433-46.LBL
Part No SW: 1K0 959 433 BT HW: 1K0 959 433 BT
Component: KSG PQ35 G2 020 0203
Coding: 998000005283CC7F0006050560085F86107C80
Shop #: WSC 04941

Part No: 1P0 951 171
Component: Innenraumueberw.010 4971
Coding: 00000000
Shop #: WSC 04941

Part No: 1K0 951 605 C
Component: LIN BACKUP HORN H03 1301

Component: NGS n.mounted

1 Fault Found:
01135 - Interior Monitoring Sensors
004 - No Signal/Communication - Intermittent
Freeze Frame:
Fault Status: 00100100
Fault Priority: 4
Fault Frequency: 100
Reset counter: 182
Time Indication: 0

Cheers
JJ

 

[jaymd]

Did you have door open or interior light on when you did the scan?

 

[Jack Jumpin]

Yeah I had the drivers door open the first scan then closed it , but the 2nd scan showed the same.

 

[JonTelfer]

Position of the doors has no effect when I'm scanning my car, so I don't think it's that. One for the dealer as you're still in warranty. Lets hope they find the issue. My experience is that dealers are good at changing parts highlighted by fault codes but if it's less than obvious (say a problem in the loom common to the sensors) then it can take *ages*.

 

[RS4Barry]

Me personally I'd clear em and see if they come back again firstly. Seats have a habit of having FC's stored from the factory that should be picked up at pdi but often aren't.