vagcom results help please

[teeth2k]

mk4 1.2 ibiza keeps loosing power at random intervals and nothing is displayed on the dash board its kinda like a coil pack has gone

VCDS-Lite Version: Release 1.2
Saturday, 12 October 2013, 18:08:58.


Chassis Type: 6L - Seat Ibiza/Cordoba
Scan: 01,02,03,08,09,15,17,19,25,37,44,46,55,56

-------------------------------------------------------------------------------
Address 01: Engine Labels: Redir Fail!
Controller: 03E 906 033 D
Component: 1,2l/4V SIMOS3 00HS4342
Coding: 00061
Shop #: WSC 06402
VCID: 21356687B8D1
VSSZZZ6LZ3R019098 SEZ7Z0B1590893
2 Faults Found:
17978 - Engine Start Blocked by Immobilizer
P1570 - 35-10 - - - Intermittent
17925 - Shareware Version. To Decode all DTCs
P1517 - 35-10 - Please Register/Activate - Intermittent
Readiness: 0000 0000

-------------------------------------------------------------------------------
Address 08: Auto HVAC Labels: 6Q0-820-045.LBL
Controller: 6L0 820 045
Component: Klimaanlage X0840
VCID: E5BDB2976C79
7 Faults Found:
01596 - Motor for Outside/Recirculated Air Flap (V154)
30-00 - Open or Short to Plus
01271 - Shareware Version. To Decode all DTCs
41-00 - Please Register/Activate
01271 - Shareware Version. To Decode all DTCs
29-10 - Please Register/Activate - Intermittent
01271 - Positioning Motor for Temperature Flap (V68)
28-10 - Short to Plus - Intermittent
01596 - Shareware Version. To Decode all DTCs
29-10 - Please Register/Activate - Intermittent
01596 - Shareware Version. To Decode all DTCs
28-10 - Please Register/Activate - Intermittent
00819 - High Pressure Sensor (G65)
07-00 - Signal too Low

 

[m0rk]

ECU Relay?

http://wiki.ross-tech.com/wiki/index.php/17925/P1517

Check your earths too

 

[teeth2k]

Would that cause it to feel like its down a cylinder? Aka foot down on throttle then a drop of power, engine still running, take out of gear and foot off throttle, back into gear and press throttle and back to normal again

 

[m0rk]

I'm looking at your fault codes.... That's what they suggest

 

[teeth2k]

Ok cheers m0rk

 

[teeth2k]

Could anyone point me in the right directon for the correct relay to replace?