I've bought this one http://cgi.ebay.co.uk/BLACK-GLOSS-V...ickersScraps_Decoupage_SM&hash=item230a5a3d15
A bit more to play with if (when) i get it wrong
A bit more to play with if (when) i get it wrong
Vinyl Wrapping FL FR Parts
- Thread starter n_d_fox
- Start date
Guys you are stars... thanks for the info and links etc...
Predo - i was going to go for something like this
http://www.carbon-vinyl.com/buy-carbon-vinyl.htm in the 300mm x 1220mm size but after seeing some of the rear valance pics above i'm thinking of going a bit further now
Alex 17 - Loving your work fella... out of interest, how much vinyl was required for the rear valance?
20 quid worth , I did the lower lip black first , I can link you all too a piece big enough too do your bottom lip for 2 quid if you like?
I believe this is the one , its perfect , had enough for 2 pops!http://wap.ebay.co.uk/Pages/ViewItem.aspx?aid=350335780288&sv=black sunstrip&emvcc=0
I use a site called udergroud graphics ,its not cheap ! I do vinyl wrapping for people on the forum alot , so if anyones local , look through my these too see my work 
I use a site called udergroud graphics ,its not cheap ! I do vinyl wrapping for people on the forum alot , so if anyones local , look through my thread too see my work
cant see why it wouldnt... you can vinyl wrap a whole car so it shouldnt have problems staying put
B and C pillars have porous surface so i doubt it would stick fine... but worth giving it a shot...
It really depends on the quality and type of adehsive for the vinyl sheet being used. ........................[this may be where the cheap "ebay vinyl wraps" may let you down good quality should last for around 7 - 10 yrs]
I have just wrapped behind the number plate on the FL Leon today, fairly easy to do but does require to people, the bottom is a little harder to do
Danny.
Danny.
I've done a quick test when i've just took my B pillar off...
It seems to have stuck well, i'll try my C pillars over the weekend
Looks good - post results - it may be easier to vinyl wrap C pillar than replace it with glossy cupra version.
I have just wrapped behind the number plate on the FL Leon today, fairly easy to do but does require to people, the bottom is a little harder to do
Danny.
Did you take the panel off the car or wrap it in place?
I was thinking about removing the panel to wrap it but havent got a clue how it comes off !
Did you take the panel off the car or wrap it in place?
I was thinking about removing the panel to wrap it but havent got a clue how it comes off !
I tried that wrapping that back panel on my own and failed. It looks like there are a couple or screws at the bottom/underneath the car and hopefully it should just pop off....i hope! Need to get some more vinyl before i can try again!
Kuzaweed
Guest
Similar threads
