Vinyl wraps!

[Buzz123]

i did everything except the roof - needed 4 pairs of hands for that.

i used a small piece of vinyl to test the surface - i gritted until there was a fine layer of dust from the plastic, probably 5 mins at most. i kept testing with the vinyl until it was sticky enough.

i figured if i gritted too much or if i destroyed it, it would be a cheapish replacement seeing as how its just a plastic cover (no idea of cost though). anyway it looks pretty mangled without the vinyl on.. you might be able to stick it on without sanding - test it out

would you happen to have a close up picture of the vinyl wrap for me please

 

[v0id]

what close up do you want to see?
and cheers for the pictures on doing the c pillars - going to get mine done soon

 

[Buzz123]

A close up of the piece of plastic thats at the top of bonnet pretty please. Because i wanted to be as smooth as possible

 

[v0id]

ill take some for you tomorrow, too dark now

 

[POPOV]

Thanks, this thread helped me out to remove the trim!