Rite guys
Today I tried to get a diagnostic done but couldn't get in today so decided to take matters into my own hands and look further into my problems first I noticed one of my boost control valves connected to my vac pipes wasn't there it had fallen down onto my manifold melting the wires going into the valve so I cut the plug and the bad melted wires off and put on new connection plug this didn't cure the
problem so I check the fuses and just by luck there was a 10 amp fuse blown I changed that disconnected the battery for 30 mins and luckily wala the fault is no longer there tho I am loosing boost pressure on the motorway so I shall be checking my vac pipes for pin holes tomorrow.
Thanks for your
help guys much appreciated

.
Thanks John.