• Hey Guest👍👎 We're looking for reviews of your local CUPRA or SEAT Dealership - it's quick and easy to do: Leave a review now

stuibaby

MK3 Cupra Driver - Proud!
Aug 14, 2009
317
0
Bristol/Bath
Hi,

After taking my SUMP off which smashed i noticed the plastic tray inside the sump was cracked.

I took this out of fear of it shaterring and causing hell in my engine.

Now im all nervous because i dont have it in there anymore.

Anyone know where i can get a Metal 'Windage tray'?

Also - because my car isnt tracked or raced around - am i under any threat by not having the plastic on in there?

Thanks,
 
Hi Robbie - no pics but i read on a vw forum that these sometimes fail and shatter

I dont see how a bit of plastic benfits the oil sump

And i cant find no metal ones so i guess im going bare lol!
 
Can you get a pic and upload it so we're all sure what we're talking about? Is it an OE (standard) sump?

Windage trays ensure there's plentiful oil in the sump for the pickup and primarily reduce drag on the crank by stopping excess oil getting splashed onto it - not something that's fitted to the MK3.
 
I binned mine after i removed it broken.

Ummm if you have a look on the vagcat.com website it is part 23 of the diagram for the ayp cylinder.

May otherwise be known as oil restrictor?

Its cheap plastic so i dont know what harm im doing running without it... Im not high specced/modified
 
I binned mine after i removed it broken.

Ummm if you have a look on the vagcat.com website it is part 23 of the diagram for the ayp cylinder.

May otherwise be known as oil restrictor?

Its cheap plastic so i dont know what harm im doing running without it... Im not high specced/modified

get another and refit it.
it guides the oil back from the drain to the centre by the oil pickup up
 
Thanks Badger5!

I read on some VW forums that people threw theres out after stories of them failing and filling engines with plastic shards.

I have emailed the parts dept at my local stealers - dont suppose you know anywhere else i could get one do you? Google doesnt show much support when googling the part number from vagcat:

06B103623C
 
they dont fail.. unless a conrod goes and hits them.. lol, and its not really their fault.. hehe

06B 103 623 C on the one I have here
 
To be honest i think if its not broken - you dont realise its there - but it is supported by only one bolt (on the oil pump) and the rest is clamped when you place sump over it.

It has holes in the middle of it and a channel for oil as badger5 said.

To be honest though (AND IM NOT A MECHANIC, so this will explain my ignorance)

I dont see how it stops oil splashing around as it has enough holes for oil to do that anyway and as long as you have enough oil in your car the oil pickup should always be submersed in oil (unless you roll your car! which then this doesn't become your biggest issue !!)

:)
 
Well after thinking long and hard about running without one, i have read many horror stories why you should have one.

Ordered from TPS for delivery tomorrow.

How many times have people removed there sumps in the past? Are the threads pretty stable (unless abused) ?
 
New Windage tray arrived!

Feels a lot more solid than my old one (but then i guess id be pretty worn after 10 years in a oil container!)

Will be fitting tonight and giving her a good drive tomorrow to/from work.