new leon pcd?

[simon34]

will be picking up my new leon tomorrow could some one confirm if the stud pattern is (pcd) 5x100 or 5x112
thanks

 

[Triple D]

5x112 iirc chap

 

[DanGB]

defo 5x112

 

[simon34]

Thanks guys thats great any idea's on offset by any chance

 

[DanGB]

depends on the wheel most are ET-51 or 54.

 

[simon34]

cool thanks mate can start looking for somthing to replace the standard ones now
i see you have lowered your car dan in your opinion is a 50mm front and 40mm rear drop ok for everyday use

 

[DanGB]

cool thanks mate can start looking for somthing to replace the standard ones now
i see you have lowered your car dan in your opinion is a 50mm front and 40mm rear drop ok for everyday use

To be honest im not sure how much of a drop the car is.

It was lowered that the top of the arch (on 18's) was about 1.5-2cmcm from the top of the wheel.

I have not highed it to about 3cm.

still get a few issues with large bumps (middle of the road type lumps). But london is littered with them

another problem is there is something under the top of the wheel arch which connects the arch liner to the wing. If turning a corner too fast and sharp it rubs. I have made this worse as i have fitted 10mm spacers on to the front wheels as my new brakes wouldnt fit otherwise. I might saw this thing off. or just higher the car more.

 

[simon34]

cool thanks dan tbh northampton is speed bump central so may have a problem if i go too low here too will have to get the tape out tommorow and see

 

[STOCKY]

depends on the wheel most are ET-51 or 54.

Dont suppose you know what the optional 18s offset is?

 

[simon34]

Et 51 i think 54 for 17's

 

[STOCKY]

Et 51 i think 54 for 17's

Cheers

Just wanted to make sure.