Torque wrench settings for wheel bolt

[markjw]

Just had to change a wheel - nice long screw right through the tyre (fortunatly not one of the new ones I just had fitted). However I'm not sure of the value the bolts should be torqued to - can anyone help?

Car is Leon Mk1 110 TDi SE with 16" alloys.

Mark

 

[BCM]

cough *handbook* cough

Only kidding matey, it'll be in your handbook tho!

 

[BCM]

Oh and hope it wasn't pissing down when you had to change the wheel!
Not fun!

 

[DPJ]

85 lb/ft

 

[markjw]

85 lb/ft

cheers, that will do nicely - don't have the handbook with me and fortunatly it was nice and dry here this morning.

Mark

 

[stuart86]

Just had to change a wheel - nice long screw right through the tyre (fortunatly not one of the new ones I just had fitted). However I'm not sure of the value the bolts should be torqued to - can anyone help?

Car is Leon Mk1 110 TDi SE with 16" alloys.

Mark

where abouts in west london are you?

 

[Icecavern]

Or the quick-fit setting... Long breaker bar as a wheel brace and bounce on it

 

[markjw]

where abouts in west london are you?

near Uxbridge.

 

[Nutkin]

near Uxbridge.

Best place to be

 

[allh2k]

there is a setting..................

I thought a few good stamps on the bar was it

but seriously not much can go wrong with 5 nuts on tight right????!

 

[Dennis]

The Cuora R's are over 100psi?????

That is quite a bit any idea why?

 

[captcolourblind]

not psi mate. wheel torques are 110nm or 85lb/ft as prev mentioned

 

[Dennis]

I knew it wasn't psi but couldn't think of abreviation of lb/ft but thought on LCR it was over 110 lb/ft, probably did not check the units but did them to 85 anyway wench is set at that for the Lotus

 

[Skorchio]

I knew it wasn't psi but couldn't think of abreviation of lb/ft but thought on LCR it was over 110 lb/ft, probably did not check the units but did them to 85 anyway wench is set at that for the Lotus

As Ice said - Must be kwik fit

 

[Deleted member 19366]

wheel nut torques on all leons mk4 golfs etc are 120 n/m