Glove Box LED

[AdamRoutley]

cheers buddy, just took my glove box one out..easy peazy lemon squeeeezy..cheers buddy!

one more thing, do they have to be any certain voltage?

 

[MDS]

Gbox is a "U" shaped clip.
No big deal.

BUY HERE : http://stores.ebay.com/warden-jp2002

 

[UncleFester]

Same guy i use for my headlight led bulbs, interior bulbs and the 5 x 36mm festoon bulbs i ordered today

 

[AdamRoutley]

what volt and what watt do i need? thanks

 

[MDS]

what volt and what watt do i need? thanks

Dude... they all work from that EBAY Store.

Im not much of an electrician...

 

[Aviry]

im going for an all led swap and HID in the headlights and i wanted to know:
how are http://www.superbrightleds.com leds?

 

[AdamRoutley]

go on the "MDS" Thread..theres a link to the ebay shop he uses...ordered me some of his sidelights from there (just waiting on delivery)

 

[Aviry]

Sorry for asking too many Questions about this stupid thing but im not sure which one i need for my number plate, is it this the "High Power LED Festoon Bulbs" or the regular "Festoon Base Bulbs" which im gonna use for the rest for the festoon inside.

(use this like to see the deference)
http://www.superbrightleds.com/festoon.html

 

[AdamRoutley]

iv brought some typical LED festoons off the net, iv brought 4 38mm, in white..two for the number plate recess and two for the sunvisor mirrors, if the fit i will be buying more to do the rest of the bulbs

 

[Aviry]

ok i'll wait for your opinion.
my site has 3.9 mm with 6 leds or 36 with 4 leds. the correct fit is the 36mm but i think it wont be bright as the 4 led high energy or the 39 mm 6 led base one. so im asking here some knows if i need the hight energy or i can use the regular?

 

[UncleFester]

Yup i'm doing mine too - rear bumper lights, glovebox light and will try it in the front door lights

 

[MDS]

Try using the HIGH POWER ones throughout.

The only place you will need the 6 LED Festoons ( Shorter 36mm ) are for the glovebox and boot.

The rest all take the 40mm HP units

They are brigher and seem to spread light better.

 

[Aviry]

ok im gonna use the HIGH POWER 37mm 3 leds for the number plat.
for the glovebox bot and center console im gonna use the base ones (not HP) but is 36mm or 39mm will be the best fit?

 

[MDS]

ok im gonna use the HIGH POWER 37mm 3 leds for the number plat.
for the glovebox bot and center console im gonna use the base ones (not HP) but is 36mm or 39mm will be the best fit?

36 for GBOX + BOOT.

The Rest = 39mm Multi LED or 40mm HP

Good Luck

 

[Aviry]

10x! ill post Pics here when the HID and the leds will be in place

 

[lc_allan]

Don't buy 36mm for the boot. It is far too small for my LCR. Glove box is alright.
You need 42mm for the boot.

Ordered 2 x 39mm for the number plate lights.

Anyone want a high power 36mm festoon for cheap, PM me

 

[Aviry]

I know! just ordered again!
The right sizes are:
42mm - Boot and Center consol
39mm - Number plate
36mm - Glove box

No need for High power. got the 6 led 39mm in the number plate and lets say its too bright
36mm for the glove box the enough too.

 

[MDS]

Sorry about that fellas... got my boot wrong... I had imagined it was the same size as the glovebox.

 

[lc_allan]

Sorry about that fellas... got my boot wrong... I had imagined it was the same size as the glovebox.

Can I get a refund from you then?
It will keep as a spare or i'll sell it on no worries

 

[barnsley]

im a bit crap on ebay can anyone give me the right names and list to change all my interior bulbs plz