do you think these sizes will fit??

[jezza49]

Hi Guys,

Ok ive got a set of rims at a great price if they fit! as they are merc rims they are 512 as i need 510 i will get stud converters which aint a biggy, thing is im not sure if they are going to rub ect im going to lower the car at the same time( not slam) just enough to tidy up the arches, they are 18inc which that i no will be fine but its the following

front et35 8.5j

rear et38 9.5j

they will look nice and wide but worried about further modding needed ect which i dont want to get into what are your thoughts and has anyone done this??

cheers

jay

 

[sheffboy]

The fronts will stick out beyond the wheel arch mate. I'm running 18 x 8.5j ET30 and their flush with the arches. If your adding converters to get up to 5 x 100 studs you'll be looking at least 20mm extra so you'll be running 8.5j ET15.

The rears may go in ok with a bit of stretch on the tyres.

Personally I'd look for something else.

 

[jezza49]

The fronts will stick out beyond the wheel arch mate. I'm running 18 x 8.5j ET30 and their flush with the arches. If your adding converters to get up to 5 x 100 studs you'll be looking at least 20mm extra so you'll be running 8.5j ET15.

The rears may go in ok with a bit of stretch on the tyres.

Personally I'd look for something else.

hey mate thanks for your reply, i didnt think they would work shame really nice rims!