Power loss issues on FR TDI 55 plate!!

[mark29]

ok thanks pal.is the turbo easy to get to u know?

 

[adam cupra 20vt]

ok thanks pal.is the turbo easy to get to u know?

If its on a ramp its not that hard to undo the exhaust bolts, the kit comes with a long pipe to get into the turbo

Look on ebay item no 350416608713

 

[mark29]

ok .so u spray the stuff into the turbo then start the car and give it a blast?

 

[adam cupra 20vt]

ok .so u spray the stuff into the turbo then start the car and give it a blast?

No you put the bit of card over the bottom of turbo to seal it then fill the turbo up with the cleaning solution, leave it for a while then spray the other stuff in to remove all the gunk.

The other part is a fuel additive I think.

 

[n11tht]

Yeah, they do a special cleaning kit for the VNT turbo's that you spray into the turbo. I've read very good reviews on the stuff.

the stuff is bloody brilliant, just used it on my car and no more sticky turbo vains. but its a pain to use.

 

[mark29]

ok so once u spary the stuff in the turbo what u do after that and the next question .where can i get it from?

 

[n11tht]

ok so once u spary the stuff in the turbo what u do after that and the next question .where can i get it from?

you get two cans, you spray the first can in and leave it for an hour, this forms a gel with sticks to the carbon deposits. the second spray removes the gel and the carbon its stuck to.

I bought mine off ebay. you also get a fuel treatment bottle which goes directly in the fuel filter and cleans the injectors.

if you buy the kit you have to drain the fuel filter to use this bottle or it end up all over your windscreen washer bottle as i discovered.