What bhp should I expect????

[leeivo]

Right... Iv got a 2001 s3 it was standard when I got it I just fitted full milltek system, pipe works 3'' down pipe with decat, n249 bypass, forge recirculating valve, force cold air intake and forge silicone turbo pipes. What's the most bhp I should expect from a decient map?

 

[Dan1720v]

Depends on the rollers. you'll want an FMIC ideally for stage 2.

expect 260 and if you get more, then bonus.

 

[aaronipswich]

Yer I'd say around the 270 mark all depends on where you get it remapped

 

[leeivo]

Depends on the rollers. you'll want an FMIC ideally for stage 2.

expect 260 and if you get more, then bonus.

Cheers for fast reply... I'm fairly new to all this what's fmic????

 

[nd-photo.nl]

http://lmgtfy.com/?q=fmic+wiki

First hit

 

[Westle]

I wouldn't be as generous as others. Due to you not have a 3" turbo Intake Pipe and obviously not knowing the condition of your turbo (a 10 year old turbo will be tired) i'd say expect 250bhp and anything else is a bonus.

 

[iamseanyboy]

bloody hell !!! jabbasports rr must be really happy,as on my mine apparently it has 286 bhp /293lb with just induction kit and cat back with remap .:-( .

 

[Dan1720v]

you could say that.

 

[Westle]

bloody hell !!! jabbasports rr must be really happy,as on my mine apparently it has 286 bhp /293lb with just induction kit and cat back with remap .:-( .

I don't mean to pee on your fire but I think that's slightly exaggerated. If it is running that I'd be petrified of bending a rod.

 

[iamseanyboy]

Tbh i realise that after being on this forum for a while and reading other peoples mods and the bhp they r producing but thats why im saying jabba must have happy rollers or a really good map as i have the printout with the receipt for the mods .Not looking fwd to rr as im going to get a reality check ...

 

[Westle]

I might head to the next Jabba RR day. Might be able to hit 350bhp with a K04

 

[sambryant]

yeah jabba are very happy, seen a stage 2 lcr hit 290bhp a few years ago without a 3" tip

 

[ibizacupra]

Tbh i realise that after being on this forum for a while and reading other peoples mods and the bhp they r producing but thats why im saying jabba must have happy rollers or a really good map as i have the printout with the receipt for the mods .Not looking fwd to rr as im going to get a reality check ...

dimsport plot on the graph?

 

[iamseanyboy]

Sorry mine is just one graph by Dyno race wrote in the middle ???

 

[iamseanyboy]

Well i downloaded the torque app and logged some maf readings and i guess my printout is a bit exggerated :-( managed to up to 211 gs last night and 209gs today .I suppose that is about right for the mods that are on the car and the car runs smooth with no fault codes ...maybe clean the maf ??

 

[ozzymyster]

Well i downloaded the torque app and logged some maf readings and i guess my printout is a bit exggerated :-( managed to up to 211 gs last night and 209gs today .I suppose that is about right for the mods that are on the car and the car runs smooth with no fault codes ...maybe clean the maf ??

is that still 274 bhp according to the maf? rough calc

 

[Double-6s]

About 250 bhp isn't it? 210 g/s I mean.

 

[aaron-gardner]

How do you calculate bhp from the maf readings?

 

[ozzymyster]

How do you calculate bhp from the maf readings?

sorry thought it was the g/s * 1.3 as a rough bhp estimate but maybe i read that wrong somewhere

i'm sure someone will clarify what the real rough calculation is...

Brian

 

[iamseanyboy]

i used gs x1.25 which works about 260 ish bhp .