Spacers

[Br!dges]

These are the company I used for both sets. They advertise 15nm but sent 20mm on 1st order so I'm guessing they have different sizes. Great seller though & they come with bolts

http://bit.ly/O4a9pS

 

[big eck]

I thought it was unsafe to run anything over 15mm with longer bolts and that it's the ones that bolt to the hub then seperate bolts then go into the spacer that's needed.

 

[Br!dges]

I havent heard anything like that? Only part I know of is you need hub centric spacers for anything over 5mm. Can't see why longer bolts are an issue?!?

I've had no trouble with them!!

 

[frodnex]

http://www.ebay.co.uk/itm/set-of-5x...ms_Trims_ET&hash=item4cfa1e3282#ht_500wt_1185
what do you think about those? why they are so cheap? will they fit on my seat leon 2004 1.9 tdi 150hp? on 18" 8J

 

[Mr OCD]

http://www.ebay.co.uk/itm/set-of-5x...ms_Trims_ET&hash=item4cfa1e3282#ht_500wt_1185
what do you think about those? why they are so cheap? will they fit on my seat leon 2004 1.9 tdi 150hp? on 18" 8J

They are cheap as they are **** ...

Not hubcentric so very bad idea...

 

[Mr OCD]

I thought it was unsafe to run anything over 15mm with longer bolts and that it's the ones that bolt to the hub then seperate bolts then go into the spacer that's needed.

I'd agree with this TBH ... running longer bolts is a pain in ass anyway...

 

[frodnex]

hmm, so which you would recomend me with 20mm 4x?

 

[bruceR]

I have 15mm on front & 10mm on rear but I wouldn't go any bigger with longer bolts, I would tend to fit the ones mentioned above that bolt to the hub then the wheel is bolted to the spacer

 

[frodnex]

hmm and your wheel sizes? and how many et and J ? have you got picture? thanks.

 

[frodnex]

and what do you think if i take those on front and rear? its all arround 15mm with bolts. will they be ok?

http://www.ebay.co.uk/itm/VW-15mm-W...s_Trims_ET&hash=item46048b21ea#ht_1403wt_1397

 

[big eck]

I havent heard anything like that? Only part I know of is you need hub centric spacers for anything over 5mm. Can't see why longer bolts are an issue?!?

I've had no trouble with them!!

That's good enough for me.

Edit : OCD is making me think twice now lol

 

[big eck]

Ok I've found a set of bolt on type 20mm spacers but I need to know about the actual bolts lol.

These ones bolt to the hub them I use my bolts to fix the wheel to the spacer, that's correct isn't it or do I need special bolts???

 

[big eck]

Sorry for all the posts but I'm ready to make a deal with this guy on ed38.

These are the spacers in question

http://www.edition38.com/forums/index.php?showtopic=456776

Would these fit straight onto the LCR???

 

[big eck]

Anyone help???

 

[Mr OCD]

Can't read that thread mate... But yes get ones that bolt to hub and wheels bolt to spacer... Also means keep locking nuts!

 

[big eck]

Here is a bad pic of them lol. I'm waiting on the guy getting back to me about the bore size first.

 

[domin8or]

Here is a bad pic of them lol. I'm waiting on the guy getting back to me about the bore size first.

That looks like the one's your after assuming 57.1 bore size(off the top of my head)

 

[big eck]

Thats what i'm waiting on, the guys telling me the bore size. I'm right on saying it has to be the same 57.1mm bore size on the inside and outside of the spacer???

 

[domin8or]

That's right

 

[frodnex]

Thats what i'm waiting on, the guys telling me the bore size. I'm right on saying it has to be the same 57.1mm bore size on the inside and outside of the spacer???

how much cost from him?