Grinding/Rubbing noise when full left lock

[jwollerton]

Went for a tyre change the other day and ever since the front left wheel makes a rubbing noise, can only hear it when going slowly and on full left, jacked it up this morning looking for play and to look at the CV - No play and the CV had no obvious wear. Think it could be brake related but unsure.

Thoughts ?

 

[andycupra]

bolts tight?
alloys have spigot rings? check you dont have two on one side or one missing?

remove wheel, use a brush to clean alloy and hub where they meet.
otherwise could it be tyre on arch or arch liner?

 

[jwollerton]

Standard alloys. Don't rub on the arch liner and no spigots, bolts tight to specs. Will try a wire brush on the hub next, come back to you soon

 

[vantastic84]

Could be the metal backing plate on the brakes?

Sent from my SM-G920F using Tapatalk

 

[jwollerton]

Okay, got the car in the air before. Looks like the pads are touching the disk when on full lock but not when straight, This was only after I had a tyre change a couple days ago

EDIT: Am I right in thinking a bad CV would make a clicking noise rather than a grinding ?

 

[andycupra]

brake lines ok? not twisted/stretching? sounds a bit weird.

 

[jwollerton]

brake lines ok? not twisted/stretching? sounds a bit weird.

Yeah all look fine, really strange. Gunna go over it again after work and double check everything