pin

Afternoon chaps/esses I thought I'd replace the disc/pads on my Mk1 Leon this morning. Started with the NS which swapped over really easy (should've realised and packed up and gone home). Next came the O/S, firstly some d!ck had sheared the little securing screw so I pulled the caliper...

I have a set of forged rods, with the 19mm wrist pins, and a set of standard pistons to suit. While i got these at a decent price im left wondering whether i should have waited and got some of the 20mm pinned rods. The pistons are standard units and came attached to the rods. Can anyone...

Basically i have just purchased this: Ebay Item Id: 370228816502 Which allows me to connect an AUX lead into my 2003 ALANA Stereo which HAS the CD6 button, now i managed to dig up an old thread about this, and it says i have to earth pin 14 on the rear of the stereo.. Now the blue...

Ive had a search but all i seem to find is people interior door handles snapping off Basically i opened my door from the inside after arriving at work The door would not close, it just kept bouncing back almost like someone was holding the handle up, the interior door handle has gone quite...

anyone got a wire diagram for the above as i seem to have bought a 2 pin regulator:doh:, will it even work if i can find the two wires which i need to cut:confused:?

I have VAG-COM and want to program extra keys for my 2002 Leon 1.6S. I read the instruction in the Ross-Tech site but need the 4-digit code to Log - In to code the keys. Does anyone have a software tool for sale that will read PIN codes using a Serial VAG cable? Thanks.

Hi, I changed my pads on my 2003 LCR this weekend but have lost one on the pins that run from the from to the back of the brembo caliper that hold the pad in place, anyone know where i can get one? I've spoken to Badger but he isnt able to source one, I've also spoken to Brembo but they...

Hey guys, It's me again! Fixed my boot trim today so I'm pretty happy, only 1 clip broken (and I didn't break it, last owner must have :D) and the metal clip was missing there as well so couldn't repair but it's gripping great now! However! I have had another problem and I feel now is the time...

Are these the wires (HIGHLIGHED IN RED)to link to get the safe pin working on the mfd2 i have been searching for ages but am still a little confused thanks

Hi, Just got a 55 Plate Leon with all the bluetooth etc. Only issue is when trying to pair a device the first thing it asks for is a pin, unfortunately we don't have the PIN, it doesn't seem to be featured in the manual either. Can anybody tell me what it is, I've tries 1,2,3,4, etc but...

I am fitting a new Blaupunkt headunit to my MK4 Ibiza, this unit allows me to directly connect to the cars standard ISO connector with no need for a adapter or harness. I need to swap the ignition live and the permanent live around. The problem is getting the wires out of the iso connector...

I need '98 ibiza gti 2.0 16v (ABF Engine) Ecu pin outs. Does anybody have the schema?

Just looking in my haynes manual (for mk3 golf) to see whats involved with changing disks and pads. I noticed it says to release the calipers to change the pads you need to undo the guide pin bolt at the bottom of the caliper and then a new one must be used. Any ideas what this guide pin...

I have been looking for a Dension Ipod kit for my mk1 Leon Cupra. All the ones I have found (VW/Seat) have a 12 pin connector to the back of the headunit. From what I can gather reading thru previous posts my Aura HU has an 8 pin connector. Question is do I need the 8 pin or can the 12...

hello everyone, my friend has an 2007 ibiza cupra, 180BHP, BBU engine code. can some one please tell which rods he has? 19mm or 20mm? we tend to believe it's a 19mm. the question refers to all the 1.8t ibiza's mk4. dosen't have to be a BBU engine code. thanks guys...

I recently bought the RNS510 and fitted it, when i switched it on i was asked for a pin(which i dont have) I read some posts and decided to try reseting it by pressing the left and right arrows and the fone symbol next to the CD/DVD drive the RNS510 restarted, the radio went on for 2 seconds and...

Hi got the forge diesel dumpvalve (and before anyone starts, i couldnt care less that its a 'diesel dumpvalve' and theyre crap) for the motor but think the garage has put it in wrong. Theres a wire that goes to pin69 which the forge guide said maybe blue and grey. Long story short, the blue...

Hi guys, Finally getting a new blade cut for my flippy key (1st go was a **** up). Got my key apart again, but how do I remove the old blade from the bit that attaches to the spring. I have a new locking pin with the new blade, but how do I get the old one off ? Any ideas ? Cheers

Does anyone know what it is? Standard OEM 20mm ones. I've looked on my version of ETOS and i cant see it anywhere. Its the only thing holding me back now. Thanks.

http://www.integrated-engineering.org/catalog/product_info.php?cPath=22&products_id=35&osCsid=5c73f854ae6e3fab94dc9f3d57e45b40 These rods are drop in replacements for the 1.8T 150 &180hp engines... Very good price i think! :) If someone want to install this rods , he must also change...