020 Gearbox Question

[G60MATT]

Hi there, hope that someone can offer some info regarding a gearbox which may or maynot have been fitted to the Ibiza.
I am looking for a gearbox code for an 020 gearbox (rod change) which uses the hydraulic clutch slave cylinder to operate the clutch lever instead of a cable. VAG fit a similar box to the 1.6 MK4 Golfs but this box doesn't have the correct engine mountings that I'm looking for, I'm hoping that the Seat used a slightly different box which will suit my needs.

 

[hopkinsgm]

AFAIK, all mk2's had cable operated clutches.
085 box on 1.0's and 1.4's
020 box on 1.6, 1.8 16v and 2.0 8v
02A box on 2.0 16v

 

[Fl@pper]

if you use a mk3 golf or tdi gearbox thats hydraulic you can swap the cylinder for the right angled mech (2 bolts) and convert it anyway

 

[G60MATT]

If I use the mk3 gearbox (02A) I have to change the engine mount, drive shafts, clutch, flywheel and buy the gearbox, new quaife diff, cable gear mech, slave cylinder etc. if I can find out which box uses this end casing I just have to buy the casing and slave cylinder!

ELSA shows a picture of the casing I'm after but its not model or engine specific so I don't know which part number to order! I know it exists but I'm not just gonna start ordering end casings until I get the right one!

 

[Fl@pper]

sorry just re read the 1st post and saw rod change

do you know the gearbox code for the casing listed in elsa ?

CDA/ASD etc ?

i can tell you what models and when with that if it helps ?

 

[G60MATT]

Sorted it out today, I need a 2002 rod change Caddy SDI slave cylinder and bracket. It basically converts the 020 gearbox to run hydraulic. Cheer fella's

 

[Chrisdaman]

what are the benifits of having a hydraulic clutch? easier to use?

 

[thewiizard]

yeah loads easier would make it like driving a new car...

Im very very very very very interested in doing this... But how does the pedal operate the master cylinder? Would it require changing the pedal box as well???