Ebay seems to have quite a few people who have s3's and upgraded the brakes. You will need the calipers though to accommodate the thicker disc
-
Guest, 🚨New Stock alert: Premium CUPRA valve caps now available in the store 👉 Order now from the merchandise store
Sorry......try this then click on 'Web Catalogue' at top of page......not sure if its anygood??
They do supply Leon calipers though..
http://www.conti-online.com/generator/www/com/en/ate/ate/general/home/index_en.html
They do supply Leon calipers though..
http://www.conti-online.com/generator/www/com/en/ate/ate/general/home/index_en.html
Just ordering my rear brakes now and wondered if i need a spacer for the rear? I have orderd discs. golf anni caliper and carriers.
Doeas anyone know what thickness the front discs need to be with a 312mm carrier?? is it 22mm as looking at a set of CRN discs and it doesnt state the thickness of them
Just ordered TTmk1 front/rear discs and a 312mm carrier. Im just confused as to the rears now as im looking at some mk4 golf anni calipers/carriers and im unsure if they bolt straight on. I thought they would of but been told might need a spacer for them to line up
With the rear there are 2 sorts of carrier I believe one that needs spaces to aline the disc and the other dosent.
I fitted aniversary carriers brought from vag parts and cupra R calipers from Big Red, both companies are very helpful. No spacers needed.
I would not go down the 2nd hand route to be honest unless you find a good set cheap, thats covered very few miles, but these tended to go for more than buying new when i was doing my conversion.
Make sure you get some good pads and discs for the front or you are wasting your time.
I fitted aniversary carriers brought from vag parts and cupra R calipers from Big Red, both companies are very helpful. No spacers needed.
I would not go down the 2nd hand route to be honest unless you find a good set cheap, thats covered very few miles, but these tended to go for more than buying new when i was doing my conversion.
Make sure you get some good pads and discs for the front or you are wasting your time.
Cheers for the advice MattFrench i am looking for prices for new anni calipers/carriers (Got a price from Vagparts and waiting on one rom Badger5). Going to be using
FRONT- 312mm CRN grooved discs and ferodo ds2500 pads and 312mm carrier
Rear- 256mm CRN grooved discs and Pagid pads and golf anni caliper/carrier
Going to get some decent brake fluid and steel lines in at some point aswell
Does this sound like a decent set up???
FRONT- 312mm CRN grooved discs and ferodo ds2500 pads and 312mm carrier
Rear- 256mm CRN grooved discs and Pagid pads and golf anni caliper/carrier
Going to get some decent brake fluid and steel lines in at some point aswell
Does this sound like a decent set up???
Yep definitely a good setup. I echo what Ollie asked, did you buy the rear calipers and carriers new or second hand?
This is what i'm going for, aparently a very good setup for approx 200BHP on a heavy tdi lump.
I'm not too worried about my rear ones at mo, i'd start using the handbrake in the wrong way.
Dont have the rear calipers/carriers yet as getting new ones hoping to have it all in the next 2weeks then ill post pics and a break down of prices.
Thats what im wanting,around 200bhp from my tdi so thought best to start with the brakes 1st
Thats what im wanting,around 200bhp from my tdi so thought best to start with the brakes 1st
Similar threads
