9.5 wide on the front ?

[rteone]

Hi all,

Im looking at putting an 18 x 9.5 wheel on the front of my lcr does anyone know if it i will come across problems,

im going to have to use spacers as the offset will catch the brakes.

Any help would be very much appreciated.

Thanks in advanced gaz

 

[SLeon]

You will most likely need to roll arches. all depends how they sit, offset etc

 

[rteone]

They are 3sdm 0.06's with an offset of ET35, i think im gonna have to go get a trial fit

 

[drka-drka]

Are you getting 4 9.5s

Why not get the 8.5s on the front and 9.5s rear, staggered fit ent that's what mine are and most folk running 0.06s go for.

 

[rteone]

Ye i know, i was gonna get the staggered but im just toying with the idea of getting 9.5s all round

 

[BigJase88]

Nah get staggered, looks better

 

[Silentnight*]

Nah get staggered, looks better

I second this

 

[danblowes]

I third it lol

 

[Applemobile]

Ewwww what's all this 8.5 push bike noncence? I run 9.5 on the fronts, you need to stretch the tyres to keep it away from the spring, I suggest a 215 40. I recon you could get a 10.5 on the front without rolling the arch.

 

[drka-drka]

10.5 would poke out front arches and look wank. 9.5 might sit flush...ish.

Poke on the front is utter **** never looks good, wider arches would work do it rteone

 

[Applemobile]

Depends how you feel..... This is 9.5 fronts et 28. You could just about get away with et 34 ish, giving a little less poke

 

[Applemobile]

Edit, that isn't sat on the floor as the other side is jacked up, so probably not a true reflection