advantage of fitting a catch can

[sambryant]

Yes my can fills up like the one in the pic, it takes a few months.

 

[bogdan_wrc]

mine has around 100-150 ml " oil mix" inside after only 200 miles....

 

[Mo Arif]

yes i used dannys pics for removing the pcv. the catch can its self is a piece of cake. i have taken a few pic of removing the pcv just for you wanye as for the hose, can i use normal red silicone?

Can someone point me to this guide

btw Sam, it looks good!

 

[bogdan_wrc]

here are the pics. hope they can be understood. sorry for the dirt

 

[wayne lcr]

its plummed in wrong mate.

 

[bogdan_wrc]

meaning? what should go where?

 

[wayne lcr]

ill go and get you some pics in a min mate.

 

[bogdan_wrc]

thank you
it has been mounted in a professional tuning service....so i trusted it was mounted fine.

 

[wayne lcr]

unless sam still got is.

 

[sambryant]

 

[sambryant]

im starting to think your pcv removal is wrong. sam(pyro) took his can to be fitted by tuning specialists and they fitted it wrong. mine has been on over 1 year and iv not had a single problem.

 

[sambryant]

lol wayne yours is wrong, the pipe that comes out the rockercover should join the pipe that comes off the 90 degree bend under the manifold. the crap thats coming out the rocker cover is going straight to the tip, not good m8

 

[bogdan_wrc]

Sam, can you show more pictures, please?
i am not a very good mechanic

 

[wayne lcr]

thats how you told me to do it in your pics lol.

 

[sambryant]

bogdan if you cant understand the pic i put up then the others will really confuse you lol.

 

[sambryant]

thats how you told me to do it in your pics lol.

nope. my set up has always been the same m8. infact i didnt give you pics on how to fit the can as you told me you already knew, i gave you pics for the pcv removal

 

[bogdan_wrc]

its not important for me to understand, personally, but i want more evidences to show the exact mounting position and location to my mechanic
but after many hours searching for the answer, now i am pretty close to a smile
and after the 1st of Jan, i want to visit my mechanic and show him how to repair it.
because, their is no way am i going back to where i install it.
but, thanks for the concern i owe you one big beer!

 

[bogdan_wrc]

but, bare in mind i dont have a DV relocation kit.... so my DV is still under the windshield.

 

[sambryant]

wayne here is the first pic i took after fitting the can,

 

[sambryant]

but, bare in mind i dont have a DV relocation kit.... so my DV is still under the windshield.

haha, the location of the dv doesnt make any difference to the catch can set up.