any1 out could help fitting my weitec that just arrived? reasonable cash waiting

[seatcupramad23]

hi guys its me again asking for you some1 to help me out fitting these weitec coilovers , willing travel up to 50 miles from birmingham and will either pay up £50 or even i have koni front coilovers one there at mo which i'm willing to let you have for a small fee of £75 considering i pay £300 for them thats a baargain i think i really need your help guys , don't have the tools or confidence to do it myself and can't afford garage fees

 

[seatcupramad23]

any1 ?

 

[JamJay]

If you lived closer then I would help you but I'm the South side of Surrey. LC or LCR?

 

[seatcupramad23]

lc

 

[JamJay]

Pretty easy to be honest dude, you don't need a spring compressor for a start as you already have front coilovers so that's the hardest bit done.

All you have to do is swap the top mounts over from the old coilovers to the new ones and install the shock as normal which is held in only by bolts, nuts and the hub. The rear is easy too, once the shock bolt is undone all the tension from the spring has gone and you can just pull it out.

I understand that an extra pair of hands inspires confidence but there really isn't a lot you can break here

 

[andy.morgan]

getting mine fitted for £80 if thats any good over i dudley port which is not to far from you

 

[Trihardernic]

Be interested i how you get on and if you like them im getting my Weitec coilover next weekend

 

[andy.morgan]

i will let you know, hopefully should be done sometime next week

 

[Trihardernic]

i will let you know, hopefully should be done sometime next week

Cheers Andy i have been thinking about it for a while but finally paid for them today, hopefully an improvement on my standard suspension,

 

[andy.morgan]

i know, been tempted for while then a set came up for sale on here for £250 so couldn't resist, from what i have heard there really good quailty

 

[Trihardernic]

Yeah i couldnt justify spending a small fortune on KW or Koni's so opted for the Weitec's from what i have heard they seem to be really good for the money

 

[seatcupramad23]

koni's are spanking quality they look new and but only have the fronts which are actually for cupra r

 

[seatcupramad23]

getting mine fitted for £80 if thats any good over i dudley port which is not to far from you

can you tell me where mate ? i live really close

 

[FASTER]

Ill do em for you mate nottingham (NG158FL) Got all the tools done loads before sunday anygood? ill even let you do em if you want just guide you and loan the tools get some new pinch bolts too!