Anyone made there own cold relocation?

[Seal_LCR]

Was just wondering if anyone had done this as it doesn't look a lot to do.

I thought about a metre of 25mm internal diameter silicone pipe a metal 25mm joiner for the tip and a few jubilee clips? Does it sound do able? Or am I missing something?

If anyone has a pic if they have done it please post it up.

 

[ReDBull]

Is there really any advantage in doing it? It's just more pipe working in the already cluttered engine bay.

 

[Seal_LCR]

Well the cm TIP kinks (as many no) and the recirc valve is a cause of it due to it being in the wrong place on the tip so was going to either get a longer pipe to the recirc or just relocate it?

If its not beneficial I won't bother I'll just lengthen the pipe

 

[ReDBull]

Just buy a better TIP lol

 

[Seal_LCR]

Lol. If I wasn't so impatient I would of but sfs was 21days and badger was 28days.

Only put it on yesterday and starting to wish I had got the sfs. But not changing it yet as wanna get my exhaust and fmic sorted first then I might change it again! But of a pain but I think I can get the kink out of it with abit of trimming

 

[ReDBull]

I'm seriously thinking of changing to the B5 2.2 soon. I thought that CM said if anyone had issues they'd give you you're money back?

 

[Seal_LCR]

Yeah but this dumb t*** cut the pipe! Lol.

I'm relocating my battery soon so I think with a 45bend to bring the filter to the battery position it will take the link out.

 

[LEE69]

Never made mine but mine lives down in the wing above the horns

 

[ReDBull]

Never made mine but mine lives down in the wing above the horns

Lee did you use relocation brackets to move your battery over? Also is there plenty of space to fit a cold air feed down into the wing? Just asking as it a job for the weekend.

 

[LEE69]

No battery is in the standard place, yeah lots of room just take of the battery cover and replace it when done

 

[Seal_LCR]

I think that's what I'm going to do it has kinked it by fitting it to my heatshield. I'm gonna get rid of the neuspeed heatshield and filter and by a green cotton that is angled I think

 

[george_seamons]

I have the pipe pictured (although mine is silver, not black). I don't use it anymore, would be happy to sell it to you if you're interested? Don't want much for it.

PM me if you're interested, dont wanna put too much on here, because I'll get shot by the admin!

 

[Seal_LCR]

I think I'm going to wait till I relocate my battery and then angle it into the battery position. That said if anyone wants a neuspeed kit

 

[aaronipswich]

Might have been phill but some one did post up all the bits you need to do it your self

 

[aaronipswich]

Seal do you mean this

 

[Seal_LCR]

Yes that's the one Aaron but I was gonna do a DIY one here's the item numbers I was looking at

This to fit into tip to move the dv

270865713881

And this to come off the turbo pipe and the tip adapter

290640027512

Sorry cant post the links as I'm in my phone.

 

[Murdered LCR]

Made my own on my old car some where on here there is a post I made if you ask lee nicely he will find it

 

[aaronipswich]

http://www.seatcupra.net/forums/showthread.php?t=275111&highlight=Cold+side+relocation

 

[LEE69]

Made my own on my old car some where on here there is a post I made if you ask lee nicely he will find it

They offer no benefit, proven on a rolling road.

 

[Murdered LCR]

They look good tho