Arm rest for a R

[magic77]

nice one alex finally the definete answer on what the weird bolt looks like after all those attempts on describing it

 

[ALEX**]

leather is 130 after 10% discount

 

[ALEX**]

have done a slightly better fitting guide hopefully mork will link it to the site, its not great manly revamped what i posted here but aliitle more detail and a few more pics.

 

[simon20vt]

Alex, fitting my arm rest at the weekend so this guide is brilliant.
However where do the clips go? Can't make out from the picture.

Thanks again.

 

[ALEX**]

hello mate drop me ur email addie and ill send my word guide there are extra pics in there that may help, but anyway when u take the tunnel and lift it you will know where the clips go, when u see it it is very obvious.

sorry its not easy to explain but it will make so much sense when u have a look when ur doing it.

 

[Chaz]

mate. can you send me your guide as well...

pls send to [email protected]..

Cheers

 

[Chaz]

cheers mate - looks good..

Just need to buy the bits now!

 

[ALEX**]

go to emmer green seat reading, talk to trevor or rob and they will if you ask give you a 10% discount this makes it 130 for leather or 110 for cloth, if u need a hand or advice fitting i can meet up with u as ur not far!

 

[Chaz]

cheers mate,,, might just take you up on that one..

Will keep you posted..

 

[simon20vt]

Thanks Alex my address is:

[email protected]

 

[stpete]

try this link not in english but good pics!

http://www.cupra.net/Leon/Mein_Cupra/MAL/page_01.html

 

[magic77]

interesting this guide shows no spacer bolt is needed as the bracket is different in the picture, which is very strange since I needed it for my VW armrest and Alex needed one for the Seat as well

 

[ALEX**]

yeah thats the guide i had when i did mine but the pics are rubbish they dont show u much at all

 

[magic77]

The armrest base is differnt as looking at one of the pictures it does not requrie the spacer bolt at all

 

[Kris]

ALEX

PM ed you

Thanks

 

[RobLeon20V]

does a golf arm rest fit also?
this looks like a complete git to do, the one in my rover was 4 bolts and 1 bracket!

 

[Kris]

I'm fitting a golf armrest at the mo,

Need some bolts to finish it.

Its not hard you just need confidence to cut you interior plastic!

 

[magic77]

Yes it does I've fitted mine a while ago only differnce is you need to trim the plastic that surrounds the pillar. best way is use a paper stencil that way you can keep cuting it and then trace the final shape onto plastic and dremmel it off.

Took about five attempts but look very snug

 

[Kris]

Yes it does I've fitted mine a while ago only differnce is you need to trim the plastic that surrounds the pillar. best way is use a paper stencil that way you can keep cuting it and then trace the final shape onto plastic and dremmel it off.

Took about five attempts but look very snug

Don't suppose you have picture?

Please.

 

[magic77]

Don't suppose you have picture?

Please.

Kris I take a picture tommor basically you have to trim abotu 3/4 - .5 cm off the bottom if you do it carefully you can get it to follow the contour of the centeter tunnerl hence I used the paper to trace it on first.

If fitting the golf one you will also need the space bolt that Alex posted a picture off