Bailey DV30

[Ian_Cupra_R]

Hi after replacing my stock DV with the Bailey Dv30 recirc the car started to run poorly, i.e juddering, not pulling well etc. It was running fine with the stock one. I tried reversing it but made no difference. Put the stock one back in a now running fine again. Weird!

Any ideas why?

 

[Phillc]

Is it a new Bailey? i had the same problem with one but it was second hand, baily will re-build for £35 so stuck the Forge back on.

 

[Ian_Cupra_R]

Yeh a new bailey, was goin to get Forge but never, regret it now though.

 

[Damoegan]

The Bailey DV30 has a problem with heat. Once it gets hot the piston inside it expands and sticks. I've had 2, one brand new direct from Bailey and another was sent to them for a refurb, both done exactly the same thing....

Changed to a Forge 007p and never had a problem with it

 

[henryg]

Forge 007p is always a favoured and reliable choice as you can see (from Damien & Phil). I have also never had a problem with the Forge 007p

 

[Ian_Cupra_R]

Well that was a waste of £75!! Forge next then, should have gone there to start with to be honest.