Been A Busy bou today

[ibizasport16v]

Been A busy boy today

After doing the car and rushing it a bit last week I decided I wanted to strip it back and do it all again, plus add some sealant before the waxing!

Working everything by hand i started about 10 ish and washed the car using:

Menzerna Gel 7.5 Wheel & Tyre Cleaner (got a spoke brush from halfrauds)
Poorboy's Super Slick & Suds - 2 Bucket Method
Meguiars Deep Crystal Paint Cleaner
Menzerna Intensive Polish
Poorboy's EX Sealant with Carnuba
Meguiars Nxt Generation Glass Cleaner
& topped it off with Poorboy's Natty's Paste Wax Blue

Had a wee half hour break letting the EX cure and im loving the finsh :thumb:

 

[lil3520]

tires lets it down.
apart from that, looks good.

 

[daveyonthemove]

tires lets it down.
apart from that, looks good.

Was thinking the same. And arches, but otherwise it looks lovely mate.
Good work

 

[ibizasport16v]

good point guys will be buying some for next time!

 

[thebeno]

Perhaps spend some of that money on a camera?

 

[ibizasport16v]

the only thing i take pics of is my car, cant justify a camera when i could be spending the money on the car mate

 

[R.Reflections]

Looking very good, well done and all by hand too


If you don't mind a couple of comments, and these are in no way knocking your hard work.

As mentioned tyres, try something like AG's rubber/tyre dressing, it can also be used on the trim and window seals.

Use a Microfibre on the panel when taking product pics, if one slipped it would scratch and damage all your hard work.

Find a small very soft tooth brush to clean the product residue out of trim edges etc.

Again great work and I hope you are as pleased with the results as I am seeing them, keep it up

 

[ibizasport16v]

Looking very good, well done and all by hand too


If you don't mind a couple of comments, and these are in no way knocking your hard work.

As mentioned tyres, try something like AG's rubber/tyre dressing, it can also be used on the trim and window seals.

Use a Microfibre on the panel when taking product pics, if one slipped it would scratch and damage all your hard work.

Find a small very soft tooth brush to clean the product residue out of trim edges etc.

Again great work and I hope you are as pleased with the results as I am seeing them, keep it up

i dont mind the comments at all, im gonna do everything you said its those wee things that let it down its nice to get comments from a professional like you mate

 

[CHR15B]

Looking spotless as always Andy mate, keep it up

 

[ibizasport16v]

just keep your eyes off my knob!

 

[CHR15B]

Oh err...

... it's fatter than mines

 

[ibizasport16v]

enuff you dirty queer