Bigger turbo on way! I hope! lol

[HTC]

HTC: Regarding Tig Art the website address is www.tig-art.co.uk, contact number 01246 455002

Apologies for the length of time this has taken, the manifold and DP are currently in production, I will be in touch.

Thanks for posting. Like I say, I'm not upset, as I know I'm getting a good product for a good price.
I am, however, itching to get my project fully underway

 

[ibizacupra]

Bill please belive me im not in any way saying it isn't worth it from them pictures it looks awesome i suppose i didnt have a clue how much they cost, but if you must can you quote me happy by PM on how much you would do this for me all in i'd be grateful o and the 3" Dp i'd need to please, plus its my bday in december wouldnt mind a nice early prezzie !! cheers bill.

Plus will that sexy metal thing fit?? lol


I know what you mean smooth suppose i just thought jesus, how much but i'd pay that just to see how sexy it is

The price of the thing is no secret. its £1100+vat and DP is £375+vat - Ceramic coating is £220+vat for mani and £85+vat for DP as shown.

also available in Inconel which is what I am looking at currently for the further evolution of ickle ibiza. Externally gated T3/T4 flanged, possibly divided also.

There is the chance of the ceramic coated one (used for a short while) becoming available along with turbo etc, as the unfortunate owner running this on his mk4 golf, has had an accident and may be breaking whats left. I'll post in Badger section as and when its confirmed available or not.

 

[The MoffMeister]

just wondered guys i have been offered some "Scat conrods which are good for 600bhp if you are interested. They are brand new and are surplus to requirements, 144mm in length and have a 20mm small end pin" and also
"Also if you are interested i have a full set of brand new Supatech valves too. Inconel/black nitrided. (look on jabba's website for full spec). £250.00"

would these fit as the bloke had them for his lcr??

 

[ibizacupra]

Jabba's price is Inconel / Nitrided Valves

Sold as a complete set of 20 valves……

Exhaust Valve Material (set of 8):

INCONEL 751 Nickel Bas ...
£528.75 inc VAT

£250 is good price - these new but used yea?

 

[The MoffMeister]

no all new bill according to him i juat want to know if they fit before i buy them as he has an lcr and me lc just making sure they are the rigth ones is all?

 

[ibizacupra]

same

 

[PhilW]

Who offered you those and what are the price for the scat rods?

 

[The MoffMeister]

not saying phil really as im going to be getting them, sorry

ok cheers bill if there the same for LC and LCR i'll grab them, cheers again bill

seeing as the valves will then fit i presume the rods will to if i buy the correct pistons?

 

[The MoffMeister]

right all checked up on and will fit, all i have to do is buy 20mm pin sized pistons instead so now on the look out for them to.

now i've bought them phil, i paid £250 for the scad rods and £250 for the full set of valves, pick them up shortly hopefully lol

Anyone got pistons cheap to lol

also how much torque you reckon i'd be looking at for this set up? looking for clutch??

 

[HTC]

Get the scat rods measured before you fit. Strength is fine, but I've heard the gudeon pin fitment tollerance can vary with that brand.

 

[myk3]

right all checked up on and will fit, all i have to do is buy 20mm pin sized pistons instead so now on the look out for them to.

now i've bought them phil, i paid £250 for the scad rods and £250 for the full set of valves, pick them up shortly hopefully lol

Anyone got pistons cheap to lol

also how much torque you reckon i'd be looking at for this set up? looking for clutch??

you dont need to buy any pistons! use your current ones with your new scat 20mm rods! just get new piston rings.

 

[The MoffMeister]

you reckon that'll be strong enough mate, not worth doing??

 

[HTC]

Get some Integrated Engineering rods made for 19mm pistons. Then sell your scats on ebay or other. No need to swap pistons then.

http://www.20squared.com/catalog/product_info.php?products_id=43

 

[myk3]

i was assuming that you have 20mm WP pistons at the moment. so i would no bother with buying any other forged pistons as yours are fine for way over 400BHP and more.

to keep costs low i would deffo sell the scat 20mm rods for some 19mm IE rods and use your current pistons with these.

just make sure you def have either 19mm or 20mm WP before you choose.

on the other hand some pistons will cost around £320 posted from the states or around 420ish in the UK this guy quoted me well http://www.cambridgemotorsport.com/contact.cfm. but i got them direct from the states in the end as it was a fair bit cheaper.

hope this helps

 

[PhilW]

Got my scat rods delivered for 200 quid. Pistons from qedpower.com are about 50-75 quid more i think.

 

[myk3]

yah http://www.qedpower.com/ is good

 

[PhilW]

I actually got my rods from Boostfactory tho. But if i was goin rods and pistons both would be from QED.

 

[The MoffMeister]

At mooment i have no pistons only have rod's and valves they were so cheap i thought why the hell not, they are 20mm pin size, and i know mine are 19mm, but as i thought i was buying pistons i didnt think this would be a problem, but what to do what to do??

cheers guys something to think about then, may sell them and buy 19s and keep original rods...

 

[ibizacupra]

Get some Integrated Engineering rods made for 19mm pistons. Then sell your scats on ebay or other. No need to swap pistons then.

http://www.20squared.com/catalog/product_info.php?products_id=43

why would you want to run a smaller pin?

 

[myk3]

why would you want to run a smaller pin?

if his current pistons are 19mm WP, then i would just throw those rods in if he isnt increasing the displacement.

though as he bought 20mm WP scat rods i was assuming he currently has 20mm wp pistons and advised to keep the stock pistons and run those rods.

like wise if he has 19mm wp pistons