car cut out and wont start.

[gammon11]

Hey people need a bit of help. Was out in the car this morning and it just died on a junction. Epc light, oil light and clicking with epc light flashing. What could it be? Cheers

 

[dalegolf215]

clutch switch possibly... get it scanned for faults and go from there

 

[gammon11]

No codes come up. Fitted a spear 405 & 167 relay and car started for 2 mins then died again.

 

[dalegolf215]

sounds like something breaking down when warm, cam sensor or cts maybe... i would have expected a fault to be thrown though

 

[Chambers_CUPRA]

Sounds like crank sensor

 

[gammon11]

Wouldnt the crank sensor show up as a code tho.

 

[Chambers_CUPRA]

Most things show up codes

You checked all pipes connect and earth points

 

[gammon11]

Car is stuck bout 15mile away. Guna try get it home tomoz n have a proper look

 

[NRM 90]

Sounds like when my crank sensor went it would just cut out then leave it for 30mins try again it start but had to keep it over 1500 rpm or it would cut out again. I had no codes up I had to have it plugged in and it had no crank speed.

 

[gammon11]

Think im just guna have to try sensor after sensor to sort it

 

[Chambers_CUPRA]

Tried vagcom?

 

[gammon11]

I dont really now wt it is

 

[gammon11]

Car is home and started first time n drove 20 mins home. Sounds more crank sensor to me now

 

[gammon11]

Bk to cutting out again. When it dies the 167 relay is clicking and the throttle body is clicking aswell. Help me please lol

 

[Chambers_CUPRA]

Still not throwing any codes up?

I had he EPC light iirc when my throttle body packed up but it would start, just wouldnt rev

What model ibiza is it?

 

[gammon11]

Its an mk3 curpa. Starting to do my tit in now

 

[Chambers_CUPRA]

If you havent got a code reader might be worth asking a garage to check it out with one

You friendly with any garages around you

 

[gammon11]

I got a code reader pal but no codes are comming up. Trying to find a needle in a hay stack atm

 

[rae1001]

This may sound off but try checking evrything to do with your boost. When my boost pipe came off i had epc, eml and a couple other lights come on, may be utter sh*t but maybe worth checking? As you say its like looking for a needle in a haystack

 

[gammon11]

Boost pipes are fine pal. Cheers tho