Comfort indicators

[josh2023]

Cupra Leon (v1) software version 1940
the indicators flash 3 times when comfort indicator is activated.
I don't have an option to change this number.
Can it be set to either 4 or 5 using obdeleven?

 

[H Rafiq]

Yes, you can.

 

[tracktoy]

Yes, you can.

Is that for the MK3/3.5 or for the MK4 happy to be proved wrong but last time I looked the MQB Evo platform only supported between 1 and 3 but I have not been following for a while so it may have changed in later software updates.

 

[H Rafiq]

This is for my mk3 Leon Cupra.

 

[josh2023]

Apologies I have a Cupra Leon 4 and do not have the set-up procedure you describe.

 

[Alex667]

99% sure you can do it in OBD11

 

[tracktoy]

99% sure you can do it in OBD11

Again I have not been following the coding for the MK4 for a while but I know that VW did turn off the feature (to increase above 3) on the Golf8, Leon4 etc and I have seen its possible with an updated dataset but that is not something OBD11 can do.

Happy to be wrong but that is what I have seen last time I looked.

 

[josh2023]

Convenience Signal

 

[Alex667]

Convenience Signal

That just turns it on or off - it doesn't change the amount of flashes it does if you just tap the stalk.

 

[josh2023]

I realise that. I just showed it for information. I would like to be able to set the number of flashes.